Olympic Parts for Balemaster Balers

WA-0030 (Twister Hook)

WA-0030 is the Olympic Twister Hook for the Balemaster Baler. Its compatible Balemaster part number is 242B0006-00. This part will fit all Balemaster Balers and there is 10 to 12 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** At this time, there is a 10 hook limit on quantities.  Supplies are short.

Twister Shaft sold Separately 

WA-0020 is the Olympic Twister Shaft for the Balemaster Baler. Its compatible Balemaster part number is 242B0004-00 or CKA0004. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Hooks sold separately

WA-0010 is the Olympic Wire Roller Bearing for the Balemaster Baler. Its compatible Balemaster part number is CHA00011. This part will fit all Balemaster Balers. Price is for 1 Bearing, there are 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Gear Reducer For Balemaster Baler DAA00042 and DAA00040
HA-0042 is the Olympic Gear Reducer for the Balemaster Balers needle and twister assembly. Its compatible Balemaster part number is DAA00042 and DAA00040. This part will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wires. If the gear reducer goes bad make sure to check the Motor Brake as that can cause premature failure. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0040 (Twister Shaft Collar)
WA-0040 is the Olympic Twister Shaft Collar for the Balemaster Baler. Its compatible Balemaster part number is DEA00003. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
balemaster Wire straightener 241A0080-00
WA-0080 is the Olympic Wire Straightener for the Balemaster Baler. Its compatible Balemaster part number is 241A0080-00. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
balemaster cutter knife
WA-0019 is the Olympic Wire Cutter Knife for the Balemaster Baler. Its compatible Balemaster part number is 242B0019-00. Price is for 1 cutter knife. This part will fit all Balemaster Balers. There is 10 of these per baler. If you would like to order these as the entire wire cutting kit with hardware then CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
balemaster twister shaft bushing CKA00003
WA-0003 is the Olympic Twister Shaft Bushing for the Balemaster Baler. Its compatible Balemaster part number is CKA00003. This part will fit all Balemaster Balers and there is 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
FE-0037 (Oil Filter)
FE-0037 is the Olympic Hydraulic Oil Filter for the Balemaster Baler with the Balemaster compatible part number of HHB00037. This filter is for the Balemaster balers with 30hp Motors, there is one of these filters per baler. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881
FE-0039 ( Oil Filter )
FE-0039 is the Olympic Hydraulic Oil Filter for the Balemaster Baler with the Balemaster compatible part number of HHB00039. This filter is for the Balemaster balers with 50hp Motors or more, there is one of these filters per baler. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881
Balemaster Suction Strainer HHA00030

FE-0030 is the Olympic Suction Strainer for the Balemaster Baler. Its equivalent Balemaster part number is HHA00030 . This part will fit all Balemaster Balers and there is 2 of these per baler. Price is for 1 Filter.  If you would like to order as a Complete Oil Filter Kit CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 949 646-9731

FE-0040 (Air Breather)
FE-0040 is the Olympic air breather for the hydraulic tank on a Balemaster baler. Its compatible balemaster part number is HHB00040 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

WA-0103 is the Olympic Idler Sprocket 14T for the Balemaster balers. This sprocket is manufactured with an oil infused brass bushing that allows it to last longer with less friction then the OEM sprocket. There are 2 of these per baler, one for the inserter assembly one for the twisting assembly.  IMPROVED with brass bushing. 

Inserter Bars (Needles) for Balemaster Balers

This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads.  Please let us know the Model# of your baler. 

 

WA-0007 is the Olympic Motor Brake for the Balemaster Balers needle and twister assembly. Its compatible Balemaster part number is DAB00007. This part will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wires. If the Motor Brake went bad it could have caused damage to the Motor and/or Gear Reducer so do check those parts as well. If you would like to save and order as a complete Motor, Motor Brake and Gear Reducer Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

WA-5000 is the Olympic 3hp Motor, Motor Brake and Gear Reducer Assembly Kit for the Balemaster Balers needle and twister assembly. These parts will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wire. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.


HA-0102 is the Olympic 8" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler. Its equivalent Balemaster part number is HAC00202 and HAC00102. This part will fit Balemaster Balers with 8" Main Cylinders. There are one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
HA-0506 (Side Cylinder Seal Kit)
HA-0506 is the Olympic Seal Kit for the Side Cylinder for the Balemaster Baler. Its equivalent Balemaster part number is HAS00506. This part will fit all Balemaster Balers.   If you would like to order a Rebuilt Side Cylinder we offer those as well.  If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820
FE-0041 (Filter Element 75hp)
This is the Olympic Hydraulic filter for the Balemaster balers with 75hp motor. Its compatible balemaster part number is HHB00041 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
EA-0034 is the Olympic Arm for the Limit Switch for the Balemaster Balers ram and twister cabinet assemblies. Its compatible Balemaster part number is GXA00031. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
HA-0603 is an Olympic 6" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler manufactured by Olympic. Its compatible Balemaster part number is HAM00603. This part will fit Balemaster Balers with 6" Main Cylinders. There are one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE . If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
1/2 x 1 SOC HD SHLDR Bolt GR5 for an American Baler. The American Baler Part number for this is 621-8-0-0-8-8. If you have any questions about the part please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881
HA-0305 is an Olympic 10" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler manufactured by Olympic Wire & Equipment. Its compatible Balemaster part number is HAC00105 and HAC00205. This part will fit Balemaster Balers with 10" Main Cylinders. There is one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE . If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Balemaster part
EA-0031 is the Olympic Limit Switch for the Balemaster Balers ram and twister cabinet assemblies. Its compatible Balemaster part number is GXA00031. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Oil Filter Kits for Balemaster Balers

This is the complete Olympic Oil Filter Kit for the Balemaster Balers. Filter kit fits all Balemaster balers. These kits includes the following parts with their equivalent Balemaster Part numbers and quantity. Kits are designated by the horsepower rating of your Balemaster baler. Feel free to call if you have any questions and or need help determining which oil filter kits is correct for your Balemaster baler. 

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-OIL30   Filter kit 30hp and 25hp    $                  443.99
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 1
HA-0017 283B0017-00 Access Cover Gasket Small 1
FE-0037 HHB00037 Filter Element 30HP 1
KIT-OIL50   Filter kit 50hp    $                  498.79
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 2
FE-0039 HHB00039 Filter Element 50HP 1
KIT-OIL75   Filter kit 75hp    $                  526.79
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 2
FE-0041 HHB00041 Filter Element 75HP 1

 

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at 866-235-8820

WA-0904 (Wear Block)

WA-0904 is the Olympic UHMW Wear Block for the Balemaster Baler. Its compatible Balemaster part number is 223A0509-04. This part will fit all Balemaster Balers and there is 6 of these per baler 1 for the cutting assembly and 5 for the needles. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Ram Wiper for Balemaster Balers 223B0802-00, 223B0803-00 and 223B0804-04
RA-0800 is the Olympic Ram Wiper for the Balemaster Baler. Its equivalent Balemaster part number is 223B0802-00, 223B0803-00 and 223B0804-04. This part will fit all Balemaster Balers. There is 1 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820
balemaster bearing for ram CEA00002

RA-0002 is the Olympic Bearing Roller for the Balemaster Baler. Its compatible Balemaster part number is CEA00002 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 6 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** Ram Roller Blocks and Shafts sold separately.

access cover gasket for balemaster baler 283B0014-00
HA-0014 is the Olympic Access cover gasket for the hydraulic tank on a Balemaster baler. This gasket is for Balers with 50-75hp motors and Its compatible balemaster part number is 283B0014-00 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
NB-0028 (Inserter Head Bearing Bolt)
NB-0028 is the Olympic bolt for the bearings at the end of the Inserter for a Balemaster Baler. Its compatible Balemaster part number is ACB00028. This part will fit all Balemaster Balers. There are up to 10 of these per Baler, depending on the model. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-9000 is the Olympic Idle Sprocket Bracket for the Balemaster Baler inserter Chainer. It is an American Made part designed to meet or exceed OEM specifications. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
RA-0793 (Gib Bar ( L+R ) Universal)
RA-0793. is the Olympic Gib Bar (universal) for the Balemaster Baler. We substitute a universal that can be used for both sides which normally are the Balemaster original numbers: 222A0007-90 ( RA-0790 ) and 222A0007-91 ( RA-0791 ). There is 2 of these per baler. If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Balemaster parts Complete Wire Tying Rebuild Kits

These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-1000   Hooks and Shafts Assembly 60  $       3034.30
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10  
WA-0003 CKA00003 Bushing twister 20
WA-0040 DEA00003 Collar Set 1 10  
NB-0046 AAB00046 Screw Cap Socket 10  
KIT-2000   Cutter Knife Assembly 42  $       1789.08
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 2
NB-0038 ACB00038 screw cap flat 10
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
KIT-3000   Full Wire Tying Rebuild Kit 180  $       7769.31
WA-0080 241A0080-00 Wire Straightener 10
WA-0001 242B0001-00 Output Wire Guide 1
WA-0601 SAI06-01 Inserter Wire Guide 1
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 7
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
WA-0010 CHA00011 Roller/Bushing 15
WA-0040 DEA00003 Collar Set 1 10
WA-0462 SP462-01 Vertical Post 2
WA-0003 CKA00003 Bushing twister 20
NB-0046 AAB00046 Screw Cap Socket 10
NB-0068 AAA00068 Screw Cap Hex 11
NB-0005 AGB00005 Locknut Crimped 16
NB-0038 ACB00038 screw cap flat 10
NB-0002 AGB00002 Locknut, Crimped 10
NB-0007 AHA00007 Flat Washer 16


We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.

WA-0036 is the Olympic Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242C0036-00 or SAT01-02. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. Part comes with its 5 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-9100 (Take Up Bracket)
WA-9100 is the Olympic Take-Up-Bracket for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0020-00 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
WA-0182 is the Olympic chain for the inserter carriage or the twisting assembly on a Balemaster baler. Its compabtible balemaster part number is DCB00182 / DCB00204 / DCB00228. This part comes in 1 length that will need to be cut down to the proper amount of links. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.