Filters

American Made

Baler

Type

Olympic Parts for Balemaster Balers

WA-03HP (3HP Motor for Balemaster Balers)
$1,160.00

WA-03HP (3HP Motor for Balemaster Balers)

WA-03HP (3HP Motor for Balemaster Balers)
WA-03HP (3HP Motor for Balemaster Balers)
WA-03HP (3HP Motor for Balemaster Balers)
WA-03HP (3HP Motor for Balemaster Balers)

WA-03HP (3HP Motor for Balemaster Balers)

$1,160.00
WA-03HP is the Olympic 3hp motor for the Balemaster Balers needle and twister assembly manufactured by Olympic Wire and Equipment. Its compatible Balemaster part number is MHCB BBF 3HP. This part will fit all Balemaster Balers. There are two of these per baler, one to control the needles in/out and one to control the twisting and cutting of the wires. Usually if the motor goes bad, it is because either the Motor Brake or Gear Reducer caused it to be overworked. If you would like to save and order as a complete Motor, Motor Brake and Gear Reducer Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)
$549.95

WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)

WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)

WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)

$549.95
WA-0036 is the Olympic Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242C0036-00 or SAT01-02. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. Part comes with its 5 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-9100 (Take Up Bracket)
$1,535.55

WA-9100 (Take Up Bracket)

WA-9100 (Take Up Bracket)

WA-9100 (Take Up Bracket)

$1,535.55
WA-9100 is the Olympic Take-Up-Bracket for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0020-00 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$295.14

WA-0182 (Roller Chain (Needles)

Balemaster part

WA-0182 (Roller Chain (Needles)

$295.14
WA-0182 is the Olympic chain for the inserter carriage or the twisting assembly on a Balemaster baler. Its compabtible balemaster part number is DCB00182 / DCB00204 / DCB00228. This part comes in 1 length that will need to be cut down to the proper amount of links. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
WA-0100 (Gear Reducer needle Sprocket)
$120.00

WA-0100 (Gear Reducer needle Sprocket)

WA-0100 (Gear Reducer needle Sprocket)

WA-0100 (Gear Reducer needle Sprocket)

$120.00
WA-0100 is the Olympic 14T sprocket that is on the Gear Reducer on a Balemaster baler. Its compabtible balemaster part number is 112A0001-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Level 1 Spare Parts Kit for a Balemaster Baler
from $2,639.29

Spare Parts Kit for a Balemaster Baler

Level 1 Spare Parts Kit for a Balemaster Baler
Level 2 Spare Parts Kit for a Balemaster Baler
Level 3 Spare Parts Kits for Balemaster Baler

Spare Parts Kit for a Balemaster Baler

$2,639.29

These are the Olympic recommended spare parts kits for the Balemaster balers. There are 3 levels depending on the extent of the spare parts that you want on hand for your Balemaster baler. Level 1 spare parts kit is just the essentials such as twister hooks shafts and some limit switches. The level 2 spare parts kit comes with all the above plus the main cylinder seal kit, gearbox and a few other essentials. The level 3 spare parts kits for the Balemaster balers comes with almost all the critical components that typically can shut down a Balemaster baler to include a set of needles, cylinder rod end, twister motor and motor brake. See below for the full contents of each kit and feel free to give our parts experts a call if you have any questions. Below is exactly what is in each spare parts kit, Pictures are subject to change.

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-SP01 BM Part Number Level 1 Spare Parts Kit 37  $               2,639.29
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
KIT-SP02 BM Part Number Level 2 Spare Parts Kit 55  $               5839.86
HA-0042 DAA00042 / DAA00040 Gear Reducer  1
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
WA-0019 242B0019-00 Cutter Knife 4
WA-0904 223A0509-04 Cutter Wear Block 2
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
HA-0305 Variable Main Cylinder Seal Kit 1
KIT-SP03 BM Part Number Level 3 Spare Parts Kit 63  $             13,748.66
HA-0042 DAA00042 / DAA00040 Gear Reducer  1
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
WA-0019 242B0019-00 Cutter Knife 4
WA-0904 223A0509-04 Cutter Wear Block 2
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
WA-0007 DAB00007 Motor Brake 1
WA-03HP MHCB BBF 3HP 3HP Motor 1
WA-0202 Variable Needles 5
HA-0305 Variable Main Cylinder Seal Kit 1
HA-0161 287A0161-00 Rod end (Puck) 1

Balemaster part
$4,680.88

HA-A025 (AO-25 Heat Exchanger)

Balemaster part

HA-A025 (AO-25 Heat Exchanger)

$4,680.88

HA-A025 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00006. This Heat exchanger is typically used on 50hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

Balemaster part
$335.14

HA-0229 (Free Flow Check Valve)

Balemaster part

HA-0229 (Free Flow Check Valve)

$335.14
HA-0229 is the Olympic Free Flow Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000229. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$355.14

HA-0225 (HV Unloading Valve)

Balemaster part

HA-0225 (HV Unloading Valve)

$355.14
HA-0225 is the Olympic HV Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000225. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$235.14

HA-0221 (Regen Check Valve (Pilot to Close)

Balemaster part

HA-0221 (Regen Check Valve (Pilot to Close)

$235.14
HA-0221 is the Olympic regen check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000221. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
hydraulic sun Valve for balemaster baler
$279.94

HA-0218 (Check Valve)

hydraulic sun Valve for balemaster baler

HA-0218 (Check Valve)

$279.94
HA-0218 is the Olympic Check valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000218. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$279.94

HA-0217 (Relief Valve Assembly)

Balemaster part

HA-0217 (Relief Valve Assembly)

$279.94
HA-0217 is the Olympic Relief Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000217. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
4 way valve for balemaster baler HCC00038
$935.14

HA-0038 (4-Way Valve 30hp)

4 way valve for balemaster baler HCC00038

HA-0038 (4-Way Valve 30hp)

$935.14
HA-0038 is the Olympic 4-way valve solenoid for the 25 and 30hp Balemaster baler. Its compabtible balemaster part number is HCC00038 and there is 1 of these per baler. This is just for the top solenoid and does not come with the valve body. If you would like the valvebody as well that is Olympic Part number HA-0038. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
access cover gasket for balemaster baler 283B0017-00
$23.00

HA-0017 (Access Cover Gasket (Small)

access cover gasket for balemaster baler 283B0017-00

HA-0017 (Access Cover Gasket (Small)

$23.00
HA-0017 is the Olympic Access cover gasket (Square) for the hydraulic tank on a Balemaster baler. This gasket is for Balers with 30-50hp motors and Its compatible balemaster part number is 283B0017-00 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
slinger rings for balemaster hogger CDA00010
from $224.66

Slinger Rings for Balemaster Hogger

slinger rings for balemaster hogger CDA00010

Slinger Rings for Balemaster Hogger

$224.66

These are the Olympic  Slinger rings for the Balemaster Hogger arbor bearing assembly. Each bearing has a inner and an outer slinger ring for the bearing and each hogger has 2 bearings. With that you will need 2 inner and 2 outer slinger rings for each Balemaster hogger. There is one hogger bearing size for the 62" and 77" units and another bearing size for the 92" and 107" units. Please select the proper size or call if you are unsure. Its equivalent Balemaster part numbers are is CDA00010, CDA00011, CDA00037 and CDA00038. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820

Pull bracket for Balemaster baler 241B0025-00
$588.66

WA-0025 (Pull Bracket for Balemaster Baler)

Pull bracket for Balemaster baler 241B0025-00

WA-0025 (Pull Bracket for Balemaster Baler)

$588.66
WA-0025 is the Olympic Pull Bracket for the Balemaster Baler inserter Chain. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Ram Roller Shaft Sets
from $710.00

Ram Roller Shaft Sets

Ram Roller Shaft Sets

Ram Roller Shaft Sets

$710.00

These are the Olympic Ram Roller Shaft Sets for the Balemaster Baler. Its equivalent Balemaster part numbers ( and ours in bold )  are 228B0014-00 ( RA-1400 ), 228B0014-02 ( RA-1402 ) , 228B0014-04 ( RA-1404 ) and 228B0014-06 ( RA-1406 ). These Shafts are sold as a set per your baler frame as per below. 

Baler Model Frame

40xx = 2x 228B0014-06 ( RA-1406 )

42xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-00 ( RA-1400 )

44xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-02 ( RA-1402 )

If you have any questions about the parts please do not hesitate to call and speak to one of our parts experts at 866-235-8820

Output Wire Guide (4 Wire) 242B00053-00 for balemaster baler
$441.94

WA-0053 (Output Wire Guide (4 Wire)

Output Wire Guide (4 Wire) 242B00053-00 for balemaster baler

WA-0053 (Output Wire Guide (4 Wire)

$441.94
WA-0053 is the Olympic Output Side Wire Guide 4 Wire for the Balemaster Baler. Its compatible Balemaster part number is 242B0053-00 and is an American Made part. This part will fit Balemaster Balers with models 4800 and 5200. There is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Hogger Bearing for Balemaster Hogger CDA00017
from $1,248.66

Hogger Bearing for Balemaster Hogger (Each)

Hogger Bearing for Balemaster Hogger CDA00017

Hogger Bearing for Balemaster Hogger (Each)

$1,248.66
This is the Olympic shaft Bearing for the Balemaster Hoggers. HP-0040 is the Olympic hogger bearing size for the 62" and 77" units, HP-0050 is other bearing size.. for the 92" and 107" units. Please select the proper size or call if you are unsure. This is only the bearing and does NOT include the Housing.  Its compatible Balemaster part number is CDA00017. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Hogger Blade for Balemaster Baler 328C0006-00 328C0001-00
from $1,120.00

Hogger Blade for a Balemaster Hogger

Hogger Blade for Balemaster Baler 328C0006-00 328C0001-00
Hogger Blade for a Balemaster Hogger
Hogger Blade for a Balemaster Hogger
Hogger Blade for a Balemaster Hogger

Hogger Blade for a Balemaster Hogger

$1,120.00
This is the Olympic Hogger Blade for a Balemaster Hogger. Its compatible Balemaster part number is 328C0001-00 and 328C0006. This part will fit all Balemaster Hoggers. There are 14 to 26 of these per hogger, if you are unsure how many hogger blades your Balemaster hogger has just call us with the model number and we can assist. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. When ordering please call to confirm amount of bolts needed for your Hogger. Please allow a 4 week lead time for this part. 
WA-0047 (Wire Guide Input Side (4 Wire)
$445.66

WA-0047 (Wire Guide Input Side (4 Wire)

WA-0047 (Wire Guide Input Side (4 Wire)

WA-0047 (Wire Guide Input Side (4 Wire)

$445.66
WA-0047 is the Olympic 4 Wire Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 252C0047-00 or SAT02-02. This part will fit Balemaster Balers with models 48XX and 49XX . There is 1 of these per baler. Part comes with its 8 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
NB-0110 (Wing Nuts)
$41.00

NB-0110 (Wing Nuts)

NB-0110 (Wing Nuts)

NB-0110 (Wing Nuts)

$41.00

NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

RA-0522 (Top Liner Bronze)
$1,385.94

RA-0522 (Top Liner Bronze)

RA-0522 (Top Liner Bronze)

RA-0522 (Top Liner Bronze)

$1,385.94
RA-0522 is the Olympic Top Liner Bronze for the Balemaster Baler. Its equivalent Balemaster part number is 223A0522-02. There are 2 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820. Price is for 1 Bronze Liner
balemaster Side Liner Bronze 223A0525-02
$1,121.94

RA-0525 (Side Liner Bronze0

balemaster Side Liner Bronze 223A0525-02

RA-0525 (Side Liner Bronze0

$1,121.94
RA-0525 is the Olympic Side Liner Bronze for the Balemaster Baler Its equivalent Balemaster part number is 223A0525-02. There are 2 of these per baler.  If you would like to order as a complete R.am Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820. Price is for 1 Bronze Liner
Balemaster part
$594.94

WA-0229 (6 Wire Inserter Guide)

Balemaster part

WA-0229 (6 Wire Inserter Guide)

$594.94
WA-0229 is the Olympic (6 Wire) Inserter Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 241B0229-00 or SAI08-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
6 wire output guide bar 242C0077-00
$499.94

WA-0077 (6 Wire output Wire Guide)

6 wire output guide bar 242C0077-00

WA-0077 (6 Wire output Wire Guide)

$499.94
WA-0077 is the Olympic (6 Wire) Output Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0077-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$559.94

WA-0076 (6 Wire Input Wire Guide)

Balemaster part

WA-0076 (6 Wire Input Wire Guide)

$559.94
WA-0076 is the Olympic (6 Wire) Input Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0076-00 or SAT03-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Cam follower for balemaster baler CEA00006
$227.97

WA-0006 (3 1/4" Cam Follower)

Cam follower for balemaster baler CEA00006

WA-0006 (3 1/4" Cam Follower)

$227.97
WA-0006 is the Olympic 3 1/4" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00006 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
WA-0005 (2" Cam Follower)
$131.94

WA-0005 (2" Cam Follower)

WA-0005 (2" Cam Follower)

WA-0005 (2" Cam Follower)

$131.94
WA-0005 is the Olympic 2" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00005 and there are 4 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$5,850.00

HA-A035 (AO-35 Heat Exchanger)

Balemaster part

HA-A035 (AO-35 Heat Exchanger)

$5,850.00
HA-A035 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. This Heat exchanger is typically used on 75hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$3,880.00

HA-A020 (AO-20 Heat Exchanger)

Balemaster part

HA-A020 (AO-20 Heat Exchanger)

$3,880.00

HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

HA-75HP (75 HP Motor)
$8,822.00

HA-75HP (75 HP Motor)

HA-75HP (75 HP Motor)
75hp motor for a balemaster baler

HA-75HP (75 HP Motor)

$8,822.00
HA-75HP is the Olympic 75HP Electrical Motor for the hydraulic assembly on a Balemaster baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$595.14

HA-0232 (PC Check Valve)

Balemaster part

HA-0232 (PC Check Valve)

$595.14
HA-0232 is the Olympic PC Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000232. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$835.14

HA-0228 (Unloading Valve)

Balemaster part

HA-0228 (Unloading Valve)

$835.14
HA-0228 is the Olympic Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000228. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
$235.14

HA-0220 (Check Valve (pilot to open)

Balemaster part

HA-0220 (Check Valve (pilot to open)

$235.14
HA-0220 is the Olympic Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000220. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
HA-0038-VB (4-Way Valve 30hp (With Valve Body)
$1,895.14

HA-0038-VB (4-Way Valve 30hp (With Valve Body)

HA-0038-VB (4-Way Valve 30hp (With Valve Body)

HA-0038-VB (4-Way Valve 30hp (With Valve Body)

$1,895.14
HA-0038-VB is the Olympic 4-way valve solenoid and valve body for the 25 and 30hp Balemaster baler. Its compatible balemaster part number is HCC00038 and there is 1 of these per baler. This is just for the top solenoid and does not come with the valve body. If you only need the 4-way solenoid then that is Olympic Part number HA-0038-VB. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.