This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture
Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx
Medium 79.5" Track is for Baler Model 42xx
Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx
These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Olympic Retail |
| KIT-1000 | Hooks and Shafts Assembly | 60 | $ 3,144.44 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| KIT-2000 | Cutter Knife Assembly | 42 | $ 1789.08 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 2 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| KIT-3000 | Full Wire Tying Rebuild Kit | 190 | $ 7879.46 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| WA-0001 | 242B0001-00 | Output Wire Guide | 1 | |
| WA-0601 | SAI06-01 | Inserter Wire Guide | 1 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 7 | |
| WA-0036 | 242C0036-00 / SAT01-02 | Input Wire Guide | 1 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| WA-0010 | CHA00011 | Roller/Bushing | 15 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| WA-0462 | SP462-01 | Vertical Post | 2 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| NB-0068 | AAA00068 | Screw Cap Hex | 11 | |
| NB-0005 | AGB00005 | Locknut Crimped | 16 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0002 | AGB00002 | Locknut, Crimped | 10 | |
| NB-0007 | AHA00007 | Flat Washer | 16 |
We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.
This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads. Please let us know the Model# of your baler.
NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
These are the Olympic recommended spare parts kits for the Balemaster balers. There are 3 levels depending on the extent of the spare parts that you want on hand for your Balemaster baler. Level 1 spare parts kit is just the essentials such as twister hooks shafts and some limit switches. The level 2 spare parts kit comes with all the above plus the main cylinder seal kit, gearbox and a few other essentials. The level 3 spare parts kits for the Balemaster balers comes with almost all the critical components that typically can shut down a Balemaster baler to include a set of needles, cylinder rod end, twister motor and motor brake. See below for the full contents of each kit and feel free to give our parts experts a call if you have any questions. Below is exactly what is in each spare parts kit, Pictures are subject to change.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Olympic Retail |
| KIT-SP01 | BM Part Number | Level 1 Spare Parts Kit | 37 | $ 2,639.29 |
| WA-0010 | CHA00011 | Roller/Bushing | 20 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 4 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| EA-0031 | GXA00031 | Limit Switch | 1 | |
| EA-0032 | Arm for Limit Switch | 1 | ||
| KIT-SP02 | BM Part Number | Level 2 Spare Parts Kit | 55 | $ 5839.86 |
| HA-0042 | DAA00042 / DAA00040 | Gear Reducer | 1 | |
| WA-0010 | CHA00011 | Roller/Bushing | 20 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 4 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 4 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 2 | |
| WA-0036 | 242C0036-00 / SAT01-02 | Input Wire Guide | 1 | |
| EA-0031 | GXA00031 | Limit Switch | 1 | |
| EA-0032 | Arm for Limit Switch | 1 | ||
| HA-0305 | Variable | Main Cylinder Seal Kit | 1 | |
| KIT-SP03 | BM Part Number | Level 3 Spare Parts Kit | 63 | $ 13,748.66 |
| HA-0042 | DAA00042 / DAA00040 | Gear Reducer | 1 | |
| WA-0010 | CHA00011 | Roller/Bushing | 20 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 4 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 4 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 2 | |
| WA-0036 | 242C0036-00 / SAT01-02 | Input Wire Guide | 1 | |
| EA-0031 | GXA00031 | Limit Switch | 1 | |
| EA-0032 | Arm for Limit Switch | 1 | ||
| WA-0007 | DAB00007 | Motor Brake | 1 | |
| WA-03HP | MHCB BBF 3HP | 3HP Motor | 1 | |
| WA-0202 | Variable | Needles | 5 | |
| HA-0305 | Variable | Main Cylinder Seal Kit | 1 | |
| HA-0161 | 287A0161-00 | Rod end (Puck) | 1 |
WA-0020 is the Olympic Twister Shaft for the Balemaster Baler. Its compatible Balemaster part number is 242B0004-00 or CKA0004. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Hooks sold separately
WA-0030 is the Olympic Twister Hook for the Balemaster Baler. Its compatible Balemaster part number is 242B0006-00. This part will fit all Balemaster Balers and there is 10 to 12 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
*** At this time, there is a 10 hook limit on quantities. Supplies are short.
Twister Shaft sold Separately
WA-0103 is the Olympic Idler Sprocket 14T for the Balemaster balers. This sprocket is manufactured with an oil infused brass bushing that allows it to last longer with less friction then the OEM sprocket. There are 2 of these per baler, one for the inserter assembly one for the twisting assembly. IMPROVED with brass bushing.
WA-0462 is the Olympic Vertical Post for the Balemaster Baler. Its compatible Balemaster part number is SP462-01 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 2 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0904 is the Olympic UHMW Wear Block for the Balemaster Baler. Its compatible Balemaster part number is 223A0509-04. This part will fit all Balemaster Balers and there is 6 of these per baler 1 for the cutting assembly and 5 for the needles. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
