Wire Tying Assembly

The Wire Tying Assembly selection represents parts associated with the tying off and feeding of baling wire within a baler. Parts include: twister hooks, twister shafts, wire straighteners, rebuild kits, bearings, sprockets and much more!

Sort by

Show
24
36
48

from $2,639.29

Spare Parts Kit for a Balemaster Baler

Level 3 Spare Parts Kits for Balemaster Baler

Spare Parts Kit for a Balemaster Baler

$2,639.29

Size

Quantity

These are the Olympic recommended spare parts kits for the Balemaster balers. There are 3 levels depending on the extent of the spare parts that you want on hand for your Balemaster baler. Level 1 spare parts kit is just the essentials such as twister hooks shafts and some limit switches. The level 2 spare parts kit comes with all the above plus the main cylinder seal kit, gearbox and a few other essentials. The level 3 spare parts kits for the Balemaster balers comes with almost all the critical components that typically can shut down a Balemaster baler to include a set of needles, cylinder rod end, twister motor and motor brake. See below for the full contents of each kit and feel free to give our parts experts a call if you have any questions. Below is exactly what is in each spare parts kit, Pictures are subject to change.

Olympic Part #	Compatible BM #	Part Name	# Per Baler	Olympic Retail
KIT-SP01	BM Part Number	Level 1 Spare Parts Kit	37	$ 2,639.29
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
KIT-SP02	BM Part Number	Level 2 Spare Parts Kit	55	$ 5839.86
HA-0042	DAA00042 / DAA00040	Gear Reducer	1
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
WA-0019	242B0019-00	Cutter Knife	4
WA-0904	223A0509-04	Cutter Wear Block	2
WA-0036	242C0036-00 / SAT01-02	Input Wire Guide	1
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
HA-0305	Variable	Main Cylinder Seal Kit	1
KIT-SP03	BM Part Number	Level 3 Spare Parts Kit	63	$ 13,748.66
HA-0042	DAA00042 / DAA00040	Gear Reducer	1
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
WA-0019	242B0019-00	Cutter Knife	4
WA-0904	223A0509-04	Cutter Wear Block	2
WA-0036	242C0036-00 / SAT01-02	Input Wire Guide	1
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
WA-0007	DAB00007	Motor Brake	1
WA-03HP	MHCB BBF 3HP	3HP Motor	1
WA-0202	Variable	Needles	5
HA-0305	Variable	Main Cylinder Seal Kit	1
HA-0161	287A0161-00	Rod end (Puck)	1

Balemaster Wire guide output side 242B0001-00

$461.94

WA-0001 (Output Wire Guide (5 Wire)

$461.94

Quantity

WA-0001 is the Olympic Output Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242B0001-00 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

balemaster twister shaft bushing CKA00003

$19.95

WA-0003 (Twister Shaft Bushing)

$19.95

Quantity

WA-0003 is the Olympic Twister Shaft Bushing for the Balemaster Baler. Its compatible Balemaster part number is CKA00003. This part will fit all Balemaster Balers and there is 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$131.94

WA-0005 (2" Cam Follower)

$131.94

Quantity

WA-0005 is the Olympic 2" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00005 and there are 4 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

Cam follower for balemaster baler CEA00006

$227.97

WA-0006 (3 1/4" Cam Follower)

$227.97

Quantity

WA-0006 is the Olympic 3 1/4" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00006 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

Motor Brake for Balemaster Balers DAB00007

$786.00

WA-0007 (Motor Brake for Balemaster Balers)

$786.00

Quantity

WA-0007 is the Olympic Motor Brake for the Balemaster Balers needle and twister assembly. Its compatible Balemaster part number is DAB00007. This part will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wires. If the Motor Brake went bad it could have caused damage to the Motor and/or Gear Reducer so do check those parts as well. If you would like to save and order as a complete Motor, Motor Brake and Gear Reducer Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Wire Roller Bearing for Balemaster Baler CHA00011

$29.00

WA-0010 (Wire Roller Bearing for Balemaster Baler)

$29.00

Quantity

WA-0010 is the Olympic Wire Roller Bearing for the Balemaster Baler. Its compatible Balemaster part number is CHA00011. This part will fit all Balemaster Balers. Price is for 1 Bearing, there are 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$204.00

WA-0020 (Twister Shaft For Balemaster Balers)

$204.00

Quantity

WA-0020 is the Olympic Twister Shaft for the Balemaster Baler. Its compatible Balemaster part number is 242B0004-00 or CKA0004. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Hooks sold separately

Pull bracket for Balemaster baler 241B0025-00

$588.66

WA-0025 (Pull Bracket for Balemaster Baler)

$588.66

Quantity

WA-0025 is the Olympic Pull Bracket for the Balemaster Baler inserter Chain. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$51.00

WA-0030 (Twister Hook)

$51.00

Quantity

WA-0030 is the Olympic Twister Hook for the Balemaster Baler. Its compatible Balemaster part number is 242B0006-00. This part will fit all Balemaster Balers and there is 10 to 12 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** At this time, there is a 10 hook limit on quantities. Supplies are short.

Twister Shaft sold Separately

$549.95

WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)

$549.95

Quantity

WA-0036 is the Olympic Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242C0036-00 or SAT01-02. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. Part comes with its 5 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$17.55

WA-0040 (Twister Shaft Collar)

$17.55

Quantity

WA-0040 is the Olympic Twister Shaft Collar for the Balemaster Baler. Its compatible Balemaster part number is DEA00003. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$445.66

WA-0047 (Wire Guide Input Side (4 Wire)

$445.66

Quantity

WA-0047 is the Olympic 4 Wire Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 252C0047-00 or SAT02-02. This part will fit Balemaster Balers with models 48XX and 49XX . There is 1 of these per baler. Part comes with its 8 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Output Wire Guide (4 Wire) 242B00053-00 for balemaster baler

$441.94

WA-0053 (Output Wire Guide (4 Wire)

$441.94

Quantity

WA-0053 is the Olympic Output Side Wire Guide 4 Wire for the Balemaster Baler. Its compatible Balemaster part number is 242B0053-00 and is an American Made part. This part will fit Balemaster Balers with models 4800 and 5200. There is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$559.94

WA-0076 (6 Wire Input Wire Guide)

$559.94

Quantity

WA-0076 is the Olympic (6 Wire) Input Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0076-00 or SAT03-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$499.94

WA-0077 (6 Wire output Wire Guide)

$499.94

Quantity

WA-0077 is the Olympic (6 Wire) Output Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0077-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

balemaster Wire straightener 241A0080-00

$39.54

WA-0080 (Wire Straightener)

$39.54

Quantity

WA-0080 is the Olympic Wire Straightener for the Balemaster Baler. Its compatible Balemaster part number is 241A0080-00. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$120.00

WA-0100 (Gear Reducer needle Sprocket)

$120.00

Quantity

WA-0100 is the Olympic 14T sprocket that is on the Gear Reducer on a Balemaster baler. Its compabtible balemaster part number is 112A0001-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$186.00

WA-0103 (Idler Sprocket for Balemaster Baler)

$186.00

Quantity

WA-0103 is the Olympic Idler Sprocket 14T for the Balemaster balers. This sprocket is manufactured with an oil infused brass bushing that allows it to last longer with less friction then the OEM sprocket. There are 2 of these per baler, one for the inserter assembly one for the twisting assembly. IMPROVED with brass bushing.

$295.14

WA-0182 (Roller Chain (Needles)

$295.14

Quantity

WA-0182 is the Olympic chain for the inserter carriage or the twisting assembly on a Balemaster baler. Its compabtible balemaster part number is DCB00182 / DCB00204 / DCB00228. This part comes in 1 length that will need to be cut down to the proper amount of links. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$594.94

WA-0229 (6 Wire Inserter Guide)

$594.94

Quantity

WA-0229 is the Olympic (6 Wire) Inserter Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 241B0229-00 or SAI08-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$131.94

WA-0462 (Vertical Post)

$131.94

Quantity

WA-0462 is the Olympic Vertical Post for the Balemaster Baler. Its compatible Balemaster part number is SP462-01 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 2 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$535.94

WA-0601 (Inserter Wire Guide 5 Wire)

$535.94

Quantity

WA-0601 is the Olympic Inserter Wire Guide (5 wire) on the needle side of a Balemaster Baler. Its compatible Balemaster part number is SAI06-01 and is American Made. This part will fit all Balemaster 40XX, 42XX and 44XX, Model numbers. Part comes with the 5 rollers and hardware. There is 1 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$38.99

WA-0904 (Wear Block)

$38.99

Quantity

WA-0904 is the Olympic UHMW Wear Block for the Balemaster Baler. Its compatible Balemaster part number is 223A0509-04. This part will fit all Balemaster Balers and there is 6 of these per baler 1 for the cutting assembly and 5 for the needles. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Filters

American Made

Baler

Type

Wire Tying Assembly

The Wire Tying Assembly selection represents parts associated with the tying off and feeding of baling wire within a baler. Parts include: twister hooks, twister shafts, wire straighteners, rebuild kits, bearings, sprockets and much more!

Main menu

Need A Baler Quote

Need Baling Wire?

Terms and Conditions

**Disclaimer