Wire Tying Assembly

The Wire Tying Assembly selection represents parts associated with the tying off and feeding of baling wire within a baler. Parts include: twister hooks, twister shafts, wire straighteners, rebuild kits, bearings, sprockets and much more!

Sort by

Show
24
36
48

from $324.66

Carriage Track for Balemaster Inserter Assembly

$324.66

Length

Quantity

This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture

Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx

Medium 79.5" Track is for Baler Model 42xx

Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx

Balemaster parts Complete Wire Tying Rebuild Kits

from $1,789.08

Complete Wire Tying Rebuild Kits for Balemaster balers

Complete Wire Tying Rebuild Kits for Balemaster balers

$3,144.44

Kit

Quantity

These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.

Olympic Part #	Compatible BM #	Part Name	# Per Baler	Olympic Retail
KIT-1000		Hooks and Shafts Assembly	60	$ 3,144.44
WA-0020	242B0004-00 / CKA0004	Twister Shaft	10
WA-0030	242B0006-00	Twister Hook	10
WA-0003	CKA00003	Bushing twister	20
WA-0040	DEA00003	Collar Set 1	10
NB-0046	AAB00046	Screw Cap Socket	10
KIT-2000		Cutter Knife Assembly	42	$ 1789.08
WA-0019	242B0019-00	Cutter Knife	10
WA-0904	223A0509-04	Cutter Wear Block	2
NB-0038	ACB00038	screw cap flat	10
NB-0006-03	APA00006	Pin Clevis	10
NB-0008	APC00008	Cotter Pin	10
KIT-3000		Full Wire Tying Rebuild Kit	190	$ 7879.46
WA-0080	241A0080-00	Wire Straightener	10
WA-0001	242B0001-00	Output Wire Guide	1
WA-0601	SAI06-01	Inserter Wire Guide	1
WA-0020	242B0004-00 / CKA0004	Twister Shaft	10
WA-0030	242B0006-00	Twister Hook	10
WA-0019	242B0019-00	Cutter Knife	10
WA-0904	223A0509-04	Cutter Wear Block	7
WA-0036	242C0036-00 / SAT01-02	Input Wire Guide	1
NB-0006-03	APA00006	Pin Clevis	10
NB-0008	APC00008	Cotter Pin	10
WA-0010	CHA00011	Roller/Bushing	15
WA-0040	DEA00003	Collar Set 1	10
WA-0462	SP462-01	Vertical Post	2
WA-0003	CKA00003	Bushing twister	20
NB-0046	AAB00046	Screw Cap Socket	10
NB-0068	AAA00068	Screw Cap Hex	11
NB-0005	AGB00005	Locknut Crimped	16
NB-0038	ACB00038	screw cap flat	10
NB-0002	AGB00002	Locknut, Crimped	10
NB-0007	AHA00007	Flat Washer	16

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.

$119.94

FE-0040 (Air Breather)

$119.94

Quantity

FE-0040 is the Olympic air breather for the hydraulic tank on a Balemaster baler. Its compatible balemaster part number is HHB00040 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$149.94

FE-0041 (Filter Element 75hp)

$149.94

Quantity

This is the Olympic Hydraulic filter for the Balemaster balers with 75hp motor. Its compatible balemaster part number is HHB00041 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

needle valve for balemaster baler HCH00004

$279.94

HA-0004 (Needle Valve)

$279.94

Quantity

HA-0004 is the Olympic Needle Valve for the hydraulic assembly on a Balemaster baler. Its compatible balemaster part number is HCH00004 and there is 1 of these per baler. The image pictures is of a used unit for reference, this part is sold as a new unit. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$279.94

HA-0217 (Relief Valve Assembly)

$279.94

Quantity

HA-0217 is the Olympic Relief Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000217. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

hydraulic sun Valve for balemaster baler

$279.94

HA-0218 (Check Valve)

$279.94

Quantity

HA-0218 is the Olympic Check valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000218. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$235.14

HA-0220 (Check Valve (pilot to open)

$235.14

Quantity

HA-0220 is the Olympic Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000220. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$235.14

HA-0221 (Regen Check Valve (Pilot to Close)

$235.14

Quantity

HA-0221 is the Olympic regen check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000221. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$355.14

HA-0225 (HV Unloading Valve)

$355.14

Quantity

HA-0225 is the Olympic HV Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000225. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$835.14

HA-0228 (Unloading Valve)

$835.14

Quantity

HA-0228 is the Olympic Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000228. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$335.14

HA-0229 (Free Flow Check Valve)

$335.14

Quantity

HA-0229 is the Olympic Free Flow Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000229. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$595.14

HA-0232 (PC Check Valve)

$595.14

Quantity

HA-0232 is the Olympic PC Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000232. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$3,030.66

HA-A020 (AO-20 Heat Exchanger)

$3,030.66

Quantity

HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$3,030.66

HA-A025 (AO-25 Heat Exchanger)

$3,030.66

Quantity

HA-A025 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00006. This Heat exchanger is typically used on 50hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$3,030.66

HA-A035 (AO-35 Heat Exchanger)

$3,030.66

Quantity

HA-A035 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. This Heat exchanger is typically used on 75hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

from $465.94

Inserter Bars (Needles) for Balemaster Balers

$465.94

Baler Model

Quantity

This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads. Please let us know the Model# of your baler.

$1.99

NB-0028 (Inserter Head Bearing Bolt)

$1.99

Quantity

NB-0028 is the Olympic bolt for the bearings at the end of the Inserter for a Balemaster Baler. Its compatible Balemaster part number is ACB00028. This part will fit all Balemaster Balers. There are up to 10 of these per Baler, depending on the model. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$49.34

NB-0033 (Door Latch for Balemaster Balers

$49.34

Quantity

NB-0033 is the Olympic Door Latch for the twister cabinets on the Balemaster Balers. Its compatible Balemaster part number is ZTA00033. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$41.00

NB-0110 (Wing Nuts)

$41.00

Quantity

NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

from $2,639.29

Spare Parts Kit for a Balemaster Baler

Level 3 Spare Parts Kits for Balemaster Baler

Spare Parts Kit for a Balemaster Baler

$2,639.29

Size

Quantity

These are the Olympic recommended spare parts kits for the Balemaster balers. There are 3 levels depending on the extent of the spare parts that you want on hand for your Balemaster baler. Level 1 spare parts kit is just the essentials such as twister hooks shafts and some limit switches. The level 2 spare parts kit comes with all the above plus the main cylinder seal kit, gearbox and a few other essentials. The level 3 spare parts kits for the Balemaster balers comes with almost all the critical components that typically can shut down a Balemaster baler to include a set of needles, cylinder rod end, twister motor and motor brake. See below for the full contents of each kit and feel free to give our parts experts a call if you have any questions. Below is exactly what is in each spare parts kit, Pictures are subject to change.

Olympic Part #	Compatible BM #	Part Name	# Per Baler	Olympic Retail
KIT-SP01	BM Part Number	Level 1 Spare Parts Kit	37	$ 2,639.29
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
KIT-SP02	BM Part Number	Level 2 Spare Parts Kit	55	$ 5839.86
HA-0042	DAA00042 / DAA00040	Gear Reducer	1
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
WA-0019	242B0019-00	Cutter Knife	4
WA-0904	223A0509-04	Cutter Wear Block	2
WA-0036	242C0036-00 / SAT01-02	Input Wire Guide	1
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
HA-0305	Variable	Main Cylinder Seal Kit	1
KIT-SP03	BM Part Number	Level 3 Spare Parts Kit	63	$ 13,748.66
HA-0042	DAA00042 / DAA00040	Gear Reducer	1
WA-0010	CHA00011	Roller/Bushing	20
WA-0030	242B0006-00	Twister Hook	10
WA-0020	242B0004-00 / CKA0004	Twister Shaft	4
WA-0080	241A0080-00	Wire Straightener	10
WA-0019	242B0019-00	Cutter Knife	4
WA-0904	223A0509-04	Cutter Wear Block	2
WA-0036	242C0036-00 / SAT01-02	Input Wire Guide	1
EA-0031	GXA00031	Limit Switch	1
EA-0032		Arm for Limit Switch	1
WA-0007	DAB00007	Motor Brake	1
WA-03HP	MHCB BBF 3HP	3HP Motor	1
WA-0202	Variable	Needles	5
HA-0305	Variable	Main Cylinder Seal Kit	1
HA-0161	287A0161-00	Rod end (Puck)	1

Balemaster Wire guide output side 242B0001-00

$461.94

WA-0001 (Output Wire Guide (5 Wire)

$461.94

Quantity

WA-0001 is the Olympic Output Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242B0001-00 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

balemaster twister shaft bushing CKA00003

$19.95

WA-0003 (Twister Shaft Bushing)

$19.95

Quantity

WA-0003 is the Olympic Twister Shaft Bushing for the Balemaster Baler. Its compatible Balemaster part number is CKA00003. This part will fit all Balemaster Balers and there is 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$131.94

WA-0005 (2" Cam Follower)

$131.94

Quantity

WA-0005 is the Olympic 2" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00005 and there are 4 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

Cam follower for balemaster baler CEA00006

$227.97

WA-0006 (3 1/4" Cam Follower)

$227.97

Quantity

WA-0006 is the Olympic 3 1/4" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00006 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

Motor Brake for Balemaster Balers DAB00007

$786.00

WA-0007 (Motor Brake for Balemaster Balers)

$786.00

Quantity

WA-0007 is the Olympic Motor Brake for the Balemaster Balers needle and twister assembly. Its compatible Balemaster part number is DAB00007. This part will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wires. If the Motor Brake went bad it could have caused damage to the Motor and/or Gear Reducer so do check those parts as well. If you would like to save and order as a complete Motor, Motor Brake and Gear Reducer Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Pull bracket for Balemaster baler 241B0025-00

$588.66

WA-0025 (Pull Bracket for Balemaster Baler)

$588.66

Quantity

WA-0025 is the Olympic Pull Bracket for the Balemaster Baler inserter Chain. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$549.95

WA-0036 (Wire Guide input Side (5 Wire) with roller bearings)

$549.95

Quantity

WA-0036 is the Olympic Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242C0036-00 or SAT01-02. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. Part comes with its 5 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$17.55

WA-0040 (Twister Shaft Collar)

$17.55

Quantity

WA-0040 is the Olympic Twister Shaft Collar for the Balemaster Baler. Its compatible Balemaster part number is DEA00003. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$445.66

WA-0047 (Wire Guide Input Side (4 Wire)

$445.66

Quantity

WA-0047 is the Olympic 4 Wire Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 252C0047-00 or SAT02-02. This part will fit Balemaster Balers with models 48XX and 49XX . There is 1 of these per baler. Part comes with its 8 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Output Wire Guide (4 Wire) 242B00053-00 for balemaster baler

$441.94

WA-0053 (Output Wire Guide (4 Wire)

$441.94

Quantity

WA-0053 is the Olympic Output Side Wire Guide 4 Wire for the Balemaster Baler. Its compatible Balemaster part number is 242B0053-00 and is an American Made part. This part will fit Balemaster Balers with models 4800 and 5200. There is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$559.94

WA-0076 (6 Wire Input Wire Guide)

$559.94

Quantity

WA-0076 is the Olympic (6 Wire) Input Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0076-00 or SAT03-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$499.94

WA-0077 (6 Wire output Wire Guide)

$499.94

Quantity

WA-0077 is the Olympic (6 Wire) Output Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0077-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

balemaster Wire straightener 241A0080-00

$39.54

WA-0080 (Wire Straightener)

$39.54

Quantity

WA-0080 is the Olympic Wire Straightener for the Balemaster Baler. Its compatible Balemaster part number is 241A0080-00. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

$120.00

WA-0100 (Gear Reducer needle Sprocket)

$120.00

Quantity

WA-0100 is the Olympic 14T sprocket that is on the Gear Reducer on a Balemaster baler. Its compabtible balemaster part number is 112A0001-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

$186.00

WA-0103 (Idler Sprocket for Balemaster Baler)

$186.00

Quantity

WA-0103 is the Olympic Idler Sprocket 14T for the Balemaster balers. This sprocket is manufactured with an oil infused brass bushing that allows it to last longer with less friction then the OEM sprocket. There are 2 of these per baler, one for the inserter assembly one for the twisting assembly. IMPROVED with brass bushing.

Filters

American Made

Baler

Type

Wire Tying Assembly

The Wire Tying Assembly selection represents parts associated with the tying off and feeding of baling wire within a baler. Parts include: twister hooks, twister shafts, wire straighteners, rebuild kits, bearings, sprockets and much more!

Main menu

Need A Baler Quote

Need Baling Wire?

Terms and Conditions

**Disclaimer