These are the Olympic  Slinger rings for the Balemaster Hogger arbor bearing assembly. Each bearing has a inner and an outer slinger ring for the bearing and each hogger has 2 bearings. With that you will need 2 inner and 2 outer slinger rings for each Balemaster hogger. There is one hogger bearing size for the 62" and 77" units and another bearing size for the 92" and 107" units. Please select the proper size or call if you are unsure. Its equivalent Balemaster part numbers are is CDA00010, CDA00011, CDA00037 and CDA00038. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820

These are the Olympic Ram Roller Shaft Sets for the Balemaster Baler. Its equivalent Balemaster part numbers ( and ours in bold )  are 228B0014-00 ( RA-1400 ), 228B0014-02 ( RA-1402 ) , 228B0014-04 ( RA-1404 ) and 228B0014-06 ( RA-1406 ). These Shafts are sold as a set per your baler frame as per below. 

Baler Model Frame

40xx = 2x 228B0014-06 ( RA-1406 )

42xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-00 ( RA-1400 )

44xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-02 ( RA-1402 )

If you have any questions about the parts please do not hesitate to call and speak to one of our parts experts at 866-235-8820

NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

This is the Olympic Hogger Rebuild kit for the Balemaster Hogger. This part will fit all Balemaster Hoggers. This kit comes with the Hogger blades, Hogger Bolts and Nuts and the Bearing Assembly If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Each Hogger width comes with a seperate amount of hogger blades and each kit is priced accordingly.  

This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture

Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx

Medium 79.5" Track is for Baler Model 42xx

Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx

This is the Olympic Hydraulic Pump for the Balemaster Balers. We have the 25hp, 30hp, 50hp and 75hp hydraulic pumps in stock and ready to ship for your Balemaster baler. The second two numbers in your Balemaster model number is the indication of its hp (for example: The 4450G-8 Balemaster Baler has a 50hp motor and subsequently would use the 50hp pump*). Models with a HP Rating of 60hp, 100hp and 150 hp have two 30hp, 50hp and 75hp pump respectively. If you have any questions feel free to call our parts and service experts at (844) 302-4881. 

*yes we know hydraulic pumps do not have hp ratings but since each motor has the same equivalent pump we say it that way to keep things simple. If you would like to know the specific high and low flow rate of each dual vane pump feel free to call and ask. 

The compatible Balemaster part numbers ( and ours in BOLD ) for the respective pumps would be HBA00044 for 25hp ( HA-0044 ) , HBA00045 for 30hp ( HA-0045 ), HBA00046 for 50hp ( HA-0046 ) and HBA00047 for 75hp ( HA-0047 ) 

Call  (844) 302-4881 we have Cylinders for your Balemaster 8" in stock ready to ship. If it is just the front main seal leaking that is an easy fix with our low cost 8" o-ring kit HERE)

The Rod End (Puck) & Cyl. Brackets are sold separately.  However, save and buy the full kit.

*** Cylinders are in stock

Rental options available as well.

(844) 302-4881

HA-0048-3 & HA-0048-3.5 are the Olympic Cylinder Brackets for the Balemaster Balers with 8" Main Cylinders. Its compatible Balemaster part number is 213A0048-00. This part will fit Balemaster Balers with 10" Main Cylinders. There are two of these per baler ( sold as a set ) .  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Cylinder complete kit can be purchase.  Save $$$

Call  (844) 302-4881 we have a NEW cylinders for your Balemaster balers 10" in stock ready to ship or we can potentially have this cylinder available for you as a Core Exchange. If it is just the front main seal leaking that is an easy fix with our low cost 10" Oring kit HERE)

Rod Ends (Puck) and Cyl. Brackets sold separately.  However, you can save and buy the full kit.   

*** Cylinders are in stock

(844) 302-4881

This is the Complete Olympic Ram Reline Kit for theBalemaster Balers. These kits include following parts with their Balemaster compatible part numbers and quantity. Choose the kit appropriate to your baler model number. For example, Baler 4030G-8 would be KIT-4000, Baler 42100G-10 would be KIT-4200, Baler 4450G-8 would be KIT-4400. Please feel free to call if you have any questions.

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881

**quantities in images are not to scale

HA-0161 is the Olympic 8" and 10" Main Cylinder Rod End (Puck) for the Balemaster Baler manufactured by Olympic Wire and Equipment. Its compatible Balemaster part number is 287A0161-00 and is manufactured by OW&E. This part is the stud that connects the end of the main cylinder to the back of the ram. This part will fit all Balemaster Balers with 8" and 10" Main Cylinders. There are one of these per baler.  If you would like to order as a complete Ram Reline Assembly Click Here. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Complete cylinder, brackets and cyl. ends (puck) sold as a full kit.  Call for your quote.