These are the Olympic Slinger rings for the Balemaster Hogger arbor bearing assembly. Each bearing has a inner and an outer slinger ring for the bearing and each hogger has 2 bearings. With that you will need 2 inner and 2 outer slinger rings for each Balemaster hogger. There is one hogger bearing size for the 62" and 77" units and another bearing size for the 92" and 107" units. Please select the proper size or call if you are unsure. Its equivalent Balemaster part numbers are is CDA00010, CDA00011, CDA00037 and CDA00038. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820
These are the Olympic Ram Roller Shaft Sets for the Balemaster Baler. Its equivalent Balemaster part numbers ( and ours in bold ) are 228B0014-00 ( RA-1400 ), 228B0014-02 ( RA-1402 ) , 228B0014-04 ( RA-1404 ) and 228B0014-06 ( RA-1406 ). These Shafts are sold as a set per your baler frame as per below.
Baler Model Frame
40xx = 2x 228B0014-06 ( RA-1406 )
42xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-00 ( RA-1400 )
44xx = 2x 228B0014-04 ( RA-1404 ) and 1x 228B0014-02 ( RA-1402 )
If you have any questions about the parts please do not hesitate to call and speak to one of our parts experts at 866-235-8820
NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
This is the Olympic Hogger Rebuild kit for the Balemaster Hogger. This part will fit all Balemaster Hoggers. This kit comes with the Hogger blades, Hogger Bolts and Nuts and the Bearing Assembly If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Each Hogger width comes with a seperate amount of hogger blades and each kit is priced accordingly.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Model Combatable | Olympic Retail |
| KIT-HOG62 | Part Number | 62" | 52 | 62" | $ 23221.16 |
| HP-0100 | 328C0001-00 | Hogger Blade 4" | 14 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 14 | ||
| NB-0012 | AGB00012 | Locknut | 22 | ||
| HP-0318 | SAF318 | Bearings 4" | 2 | ||
| KIT-HOG77 | Part Number | 77" | 64 | 77" | $ 28059.93 |
| HP-0100 | 328C0001-00 | Hogger Blade 4" | 18 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 18 | ||
| NB-0012 | AGB00012 | Locknut | 26 | ||
| HP-0318 | SAF318 | Bearings 4" | 2 | ||
| KIT-HOG92 | Part Number | 92" | 84 | 92" | $ 33392.25 |
| HP-0200 | 328C0006-00 | Hogger Blade 5 3/4" | 22 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 22 | ||
| NB-0012 | AGB00012 | Locknut | 38 | ||
| HP-0322 | SAF322 | Bearing Assembly 92" & 107" | 2 | ||
| KIT-HOG107 | Part Number | 107" | 96 | 107" | $ 38231.03 |
| HP-0200 | 328C0006-00 | Hogger Blade 5 3/4" | 26 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 26 | ||
| NB-0012 | AGB00012 | Locknut | 42 | ||
| HP-0322 | SAF322 | Bearing Assembly 92" & 107" | 2 |
This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture
Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx
Medium 79.5" Track is for Baler Model 42xx
Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx
