Cam follower for balemaster baler CEA00006
WA-0006 is the Olympic 3 1/4" cam follower for the inserter carriage on a Balemaster baler. Its compabtible balemaster part number is CEA00006 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
WA-0007 is the Olympic Motor Brake for the Balemaster Balers needle and twister assembly. Its compatible Balemaster part number is DAB00007. This part will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wires. If the Motor Brake went bad it could have caused damage to the Motor and/or Gear Reducer so do check those parts as well. If you would like to save and order as a complete Motor, Motor Brake and Gear Reducer Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0010 is the Olympic Wire Roller Bearing for the Balemaster Baler. Its compatible Balemaster part number is CHA00011. This part will fit all Balemaster Balers. Price is for 1 Bearing, there are 20 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
balemaster cutter knife
WA-0019 is the Olympic Wire Cutter Knife for the Balemaster Baler. Its compatible Balemaster part number is 242B0019-00. Price is for 1 cutter knife. This part will fit all Balemaster Balers. There is 10 of these per baler. If you would like to order these as the entire wire cutting kit with hardware then CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

WA-0020 is the Olympic Twister Shaft for the Balemaster Baler. Its compatible Balemaster part number is 242B0004-00 or CKA0004. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Hooks sold separately

WA-0025 is the Olympic Pull Bracket for the Balemaster Baler inserter Chain. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0030 (Twister Hook)

WA-0030 is the Olympic Twister Hook for the Balemaster Baler. Its compatible Balemaster part number is 242B0006-00. This part will fit all Balemaster Balers and there is 10 to 12 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** At this time, there is a 10 hook limit on quantities.  Supplies are short.

Twister Shaft sold Separately 

WA-0036 is the Olympic Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 242C0036-00 or SAT01-02. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 1 of these per baler. Part comes with its 5 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0040 (Twister Shaft Collar)
WA-0040 is the Olympic Twister Shaft Collar for the Balemaster Baler. Its compatible Balemaster part number is DEA00003. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0047 (Wire Guide Input Side (4 Wire)
WA-0047 is the Olympic 4 Wire Input Side Wire Guide for the Balemaster Baler. Its compatible Balemaster part number is 252C0047-00 or SAT02-02. This part will fit Balemaster Balers with models 48XX and 49XX . There is 1 of these per baler. Part comes with its 8 rollers and hardware. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Output Wire Guide (4 Wire) 242B00053-00 for balemaster baler
WA-0053 is the Olympic Output Side Wire Guide 4 Wire for the Balemaster Baler. Its compatible Balemaster part number is 242B0053-00 and is an American Made part. This part will fit Balemaster Balers with models 4800 and 5200. There is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Balemaster part
WA-0076 is the Olympic (6 Wire) Input Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0076-00 or SAT03-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
6 wire output guide bar 242C0077-00
WA-0077 is the Olympic (6 Wire) Output Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0077-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
balemaster Wire straightener 241A0080-00
WA-0080 is the Olympic Wire Straightener for the Balemaster Baler. Its compatible Balemaster part number is 241A0080-00. This part will fit all Balemaster Balers and there is 10 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0100 (Gear Reducer needle Sprocket)
WA-0100 is the Olympic 14T sprocket that is on the Gear Reducer on a Balemaster baler. Its compabtible balemaster part number is 112A0001-00. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

WA-0103 is the Olympic Idler Sprocket 14T for the Balemaster balers. This sprocket is manufactured with an oil infused brass bushing that allows it to last longer with less friction then the OEM sprocket. There are 2 of these per baler, one for the inserter assembly one for the twisting assembly.  IMPROVED with brass bushing. 

Balemaster part
WA-0182 is the Olympic chain for the inserter carriage or the twisting assembly on a Balemaster baler. Its compabtible balemaster part number is DCB00182 / DCB00204 / DCB00228. This part comes in 1 length that will need to be cut down to the proper amount of links. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
WA-0229 is the Olympic (6 Wire) Inserter Wire Guide for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 241B0229-00 or SAI08-02 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
balemaster Vertical Post SP462-01

WA-0462 is the Olympic Vertical Post for the Balemaster Baler. Its compatible Balemaster part number is SP462-01 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 2 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Balemaster inserter Wire guide SAI06-01
WA-0601 is the Olympic Inserter Wire Guide (5 wire) on the needle side of a Balemaster Baler. Its compatible Balemaster part number is SAI06-01 and is American Made. This part will fit all Balemaster 40XX, 42XX and 44XX, Model numbers. Part comes with the 5 rollers and hardware. There is 1 of these per baler. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
WA-0904 (Wear Block)

WA-0904 is the Olympic UHMW Wear Block for the Balemaster Baler. Its compatible Balemaster part number is 223A0509-04. This part will fit all Balemaster Balers and there is 6 of these per baler 1 for the cutting assembly and 5 for the needles. If you would like to order as a complete wire tying assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

WA-5000 is the Olympic 3hp Motor, Motor Brake and Gear Reducer Assembly Kit for the Balemaster Balers needle and twister assembly. These parts will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wire. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.


WA-9000 is the Olympic Idle Sprocket Bracket for the Balemaster Baler inserter Chainer. It is an American Made part designed to meet or exceed OEM specifications. This part will fit all Balemaster Balers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
WA-9100 (Take Up Bracket)
WA-9100 is the Olympic Take-Up-Bracket for the baling wire assembly on a Balemaster baler. Its compabtible balemaster part number is 242C0020-00 if you want it to come with the rollers. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.