Wire Tying Assembly

Wire Tying Assembly

The Wire Tying Assembly selection represents parts associated with the tying off and feeding of baling wire within a baler. Parts include: twister hooks, twister shafts, wire straighteners, rebuild kits, bearings, sprockets and much more!

Balemaster parts Complete Wire Tying Rebuild Kits

These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-1000   Hooks and Shafts Assembly 60  $      3,144.44
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10  
WA-0003 CKA00003 Bushing twister 20
WA-0040 DEA00003 Collar Set 1 10  
NB-0046 AAB00046 Screw Cap Socket 10  
KIT-2000   Cutter Knife Assembly 42  $       1789.08
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 2
NB-0038 ACB00038 screw cap flat 10
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
KIT-3000   Full Wire Tying Rebuild Kit 190  $       7879.46
WA-0080 241A0080-00 Wire Straightener 10
WA-0001 242B0001-00 Output Wire Guide 1
WA-0601 SAI06-01 Inserter Wire Guide 1
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 7
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
WA-0010 CHA00011 Roller/Bushing 15
WA-0040 DEA00003 Collar Set 1 10
WA-0462 SP462-01 Vertical Post 2
WA-0003 CKA00003 Bushing twister 20
NB-0046 AAB00046 Screw Cap Socket 10
NB-0068 AAA00068 Screw Cap Hex 11
NB-0005 AGB00005 Locknut Crimped 16
NB-0038 ACB00038 screw cap flat 10
NB-0002 AGB00002 Locknut, Crimped 10
NB-0007 AHA00007 Flat Washer 16


We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.

Level 1 Spare Parts Kit for a Balemaster Baler

These are the Olympic recommended spare parts kits for the Balemaster balers. There are 3 levels depending on the extent of the spare parts that you want on hand for your Balemaster baler. Level 1 spare parts kit is just the essentials such as twister hooks shafts and some limit switches. The level 2 spare parts kit comes with all the above plus the main cylinder seal kit, gearbox and a few other essentials. The level 3 spare parts kits for the Balemaster balers comes with almost all the critical components that typically can shut down a Balemaster baler to include a set of needles, cylinder rod end, twister motor and motor brake. See below for the full contents of each kit and feel free to give our parts experts a call if you have any questions. Below is exactly what is in each spare parts kit, Pictures are subject to change.

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-SP01 BM Part Number Level 1 Spare Parts Kit 37  $               2,639.29
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
KIT-SP02 BM Part Number Level 2 Spare Parts Kit 55  $               5839.86
HA-0042 DAA00042 / DAA00040 Gear Reducer  1
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
WA-0019 242B0019-00 Cutter Knife 4
WA-0904 223A0509-04 Cutter Wear Block 2
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
HA-0305 Variable Main Cylinder Seal Kit 1
KIT-SP03 BM Part Number Level 3 Spare Parts Kit 63  $             13,748.66
HA-0042 DAA00042 / DAA00040 Gear Reducer  1
WA-0010 CHA00011 Roller/Bushing 20
WA-0030 242B0006-00 Twister Hook 10
WA-0020 242B0004-00 / CKA0004 Twister Shaft 4
WA-0080 241A0080-00 Wire Straightener 10
WA-0019 242B0019-00 Cutter Knife 4
WA-0904 223A0509-04 Cutter Wear Block 2
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
EA-0031 GXA00031 Limit Switch 1
EA-0032   Arm for Limit Switch 1
WA-0007 DAB00007 Motor Brake 1
WA-03HP MHCB BBF 3HP 3HP Motor 1
WA-0202 Variable Needles 5
HA-0305 Variable Main Cylinder Seal Kit 1
HA-0161 287A0161-00 Rod end (Puck) 1

WA-5000 is the Olympic 3hp Motor, Motor Brake and Gear Reducer Assembly Kit for the Balemaster Balers needle and twister assembly. These parts will fit all Balemaster Balers. There is 2 of these per baler. 1 for to control the needles in/out and 1 to control the twisting and cutting of the wire. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.