Call 866-235-8820 for updated pricing and availability.

HA-160N; Its equivalent Balemaster part number is 287A0160-00. This part will fit all Balemaster Balers.  If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820

HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

HA-A025 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00006. This Heat exchanger is typically used on 50hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

This is the Olympic Hogger Rebuild kit for the Balemaster Hogger. This part will fit all Balemaster Hoggers. This kit comes with the Hogger blades, Hogger Bolts and Nuts and the Bearing Assembly If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Each Hogger width comes with a seperate amount of hogger blades and each kit is priced accordingly.  

This is the Olympic Hydraulic Pump for the Balemaster Balers. We have the 25hp, 30hp, 50hp and 75hp hydraulic pumps in stock and ready to ship for your Balemaster baler. The second two numbers in your Balemaster model number is the indication of its hp (for example: The 4450G-8 Balemaster Baler has a 50hp motor and subsequently would use the 50hp pump*). Models with a HP Rating of 60hp, 100hp and 150 hp have two 30hp, 50hp and 75hp pump respectively. If you have any questions feel free to call our parts and service experts at (844) 302-4881. 

*yes we know hydraulic pumps do not have hp ratings but since each motor has the same equivalent pump we say it that way to keep things simple. If you would like to know the specific high and low flow rate of each dual vane pump feel free to call and ask. 

The compatible Balemaster part numbers ( and ours in BOLD ) for the respective pumps would be HBA00044 for 25hp ( HA-0044 ) , HBA00045 for 30hp ( HA-0045 ), HBA00046 for 50hp ( HA-0046 ) and HBA00047 for 75hp ( HA-0047 ) 

This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads.  Please let us know the Model# of your baler. 

• IEG Asset #: IP19
• 6CY
• Serial Number: K3024

• Asset #: IP20
• 6CY
• Serial Number: K3032

This lift is easy to maneuver with 4" x 1" wheels, two rigid, two locking swivel. Features a removable platform with adjustable forks underneath for increased versatility for transporting your baling wire on the cart.  Platform size is 20" wide by 20" long. The handle length on the hand crank may be adjusted to increase or decrease lifting/lowering speeds. Lifts 2-1/2" per rotation.  Questions, call us (844) 302-4881

Olympic Equipment Baler Parts Online

• IEG ASSET #: 5070
• Marathon/RJ-100
• Serial Number: 90367
• Universal Understructure
• 34CY
• Load Height: 52"
• 23' OAL

• IEG ASSET #: 5095
• Marathon/RJ-250HT
• Serial Number: 39974
• Universal Understructure
• 30CY
• Load Height: 52"
• 23' 6" OAL

• IEG ASSET #: 5074
• Marathon/RJ-250WD
• Serial Number: 405353
• Universal Understructure
• 30CY
• Load Height: 52"
• 21' 6" OAL Compactor Only (Fork Down Position)
• 74" Inside Fork Dimension
• 40.5" Fork Height
• 3/4" Fork Thickness

• IEG ASSET #: 3942
• Marathon/RJ-250WD
• Serial Number: 2156935
• Universal Understructure
• 34CY
• Load Height: 49"
• 22' 6" OAL (Forks Up Position)
• 36" Inside Fork Dimension

• IEG ASSET #: IP4
• Marathon/RJ-225
• Serial Number: 163794
• 2CY
• 48" Load Height
• 10' 6"
• Location: Arizona

• IEG ASSET #: IP6
• Marathon/RJ-225
• Serial Number: 98870
• 2CY
• 48" Load Height
• 10' 6" OAL

NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

This is the complete Olympic Oil Filter Kit for the Balemaster Balers. Filter kit fits all Balemaster balers. These kits includes the following parts with their equivalent Balemaster Part numbers and quantity. Kits are designated by the horsepower rating of your Balemaster baler. Feel free to call if you have any questions and or need help determining which oil filter kits is correct for your Balemaster baler. 

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at 866-235-8820

RA-0002 is the Olympic Bearing Roller for the Balemaster Baler. Its compatible Balemaster part number is CEA00002 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 6 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** Ram Roller Blocks and Shafts sold separately.

Call  (844) 302-4881 we have Cylinders for your Balemaster 8" in stock ready to ship. If it is just the front main seal leaking that is an easy fix with our low cost 8" o-ring kit HERE)

The Rod End (Puck) & Cyl. Brackets are sold separately.  However, save and buy the full kit.

*** Cylinders are in stock

Rental options available as well.

(844) 302-4881

Call  (844) 302-4881 we have a NEW cylinders for your Balemaster balers 10" in stock ready to ship or we can potentially have this cylinder available for you as a Core Exchange. If it is just the front main seal leaking that is an easy fix with our low cost 10" Oring kit HERE)

Rod Ends (Puck) and Cyl. Brackets sold separately.  However, you can save and buy the full kit.   

*** Cylinders are in stock

(844) 302-4881

This is the Complete Olympic Ram Reline Kit for theBalemaster Balers. These kits include following parts with their Balemaster compatible part numbers and quantity. Choose the kit appropriate to your baler model number. For example, Baler 4030G-8 would be KIT-4000, Baler 42100G-10 would be KIT-4200, Baler 4450G-8 would be KIT-4400. Please feel free to call if you have any questions.

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881

**quantities in images are not to scale