This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture
Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx
Medium 79.5" Track is for Baler Model 42xx
Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx
These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Olympic Retail |
| KIT-1000 | Hooks and Shafts Assembly | 60 | $ 3,144.44 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| KIT-2000 | Cutter Knife Assembly | 42 | $ 1789.08 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 2 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| KIT-3000 | Full Wire Tying Rebuild Kit | 190 | $ 7879.46 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| WA-0001 | 242B0001-00 | Output Wire Guide | 1 | |
| WA-0601 | SAI06-01 | Inserter Wire Guide | 1 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 7 | |
| WA-0036 | 242C0036-00 / SAT01-02 | Input Wire Guide | 1 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| WA-0010 | CHA00011 | Roller/Bushing | 15 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| WA-0462 | SP462-01 | Vertical Post | 2 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| NB-0068 | AAA00068 | Screw Cap Hex | 11 | |
| NB-0005 | AGB00005 | Locknut Crimped | 16 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0002 | AGB00002 | Locknut, Crimped | 10 | |
| NB-0007 | AHA00007 | Flat Washer | 16 |
We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.
FE-0021 is the Olympic Breather Element for the Balemaster Baler. Its compatible Balemaster part number has been updated. This part will fit all Balemaster Balers and there are two of these per baler. Price is for one filter. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
FE-0030 is the Olympic Suction Strainer for the Balemaster Baler. Its equivalent Balemaster part number is HHA00030 . This part will fit all Balemaster Balers and there is 2 of these per baler. Price is for 1 Filter. If you would like to order as a Complete Oil Filter Kit CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 949 646-9731
HA-0048-3 & HA-0048-3.5 are the Olympic Cylinder Brackets for the Balemaster Balers with 8" Main Cylinders. Its compatible Balemaster part number is 213A0048-00. This part will fit Balemaster Balers with 10" Main Cylinders. There are two of these per baler ( sold as a set ) . If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Cylinder complete kit can be purchase. Save $$$
HA-0161 is the Olympic 8" and 10" Main Cylinder Rod End (Puck) for the Balemaster Baler manufactured by Olympic Wire and Equipment. Its compatible Balemaster part number is 287A0161-00 and is manufactured by OW&E. This part is the stud that connects the end of the main cylinder to the back of the ram. This part will fit all Balemaster Balers with 8" and 10" Main Cylinders. There are one of these per baler. If you would like to order as a complete Ram Reline Assembly Click Here. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Complete cylinder, brackets and cyl. ends (puck) sold as a full kit. Call for your quote.
This is the Olympic Hogger Rebuild kit for the Balemaster Hogger. This part will fit all Balemaster Hoggers. This kit comes with the Hogger blades, Hogger Bolts and Nuts and the Bearing Assembly If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Each Hogger width comes with a seperate amount of hogger blades and each kit is priced accordingly.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Model Combatable | Olympic Retail |
| KIT-HOG62 | Part Number | 62" | 52 | 62" | $ 23221.16 |
| HP-0100 | 328C0001-00 | Hogger Blade 4" | 14 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 14 | ||
| NB-0012 | AGB00012 | Locknut | 22 | ||
| HP-0318 | SAF318 | Bearings 4" | 2 | ||
| KIT-HOG77 | Part Number | 77" | 64 | 77" | $ 28059.93 |
| HP-0100 | 328C0001-00 | Hogger Blade 4" | 18 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 18 | ||
| NB-0012 | AGB00012 | Locknut | 26 | ||
| HP-0318 | SAF318 | Bearings 4" | 2 | ||
| KIT-HOG92 | Part Number | 92" | 84 | 92" | $ 33392.25 |
| HP-0200 | 328C0006-00 | Hogger Blade 5 3/4" | 22 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 22 | ||
| NB-0012 | AGB00012 | Locknut | 38 | ||
| HP-0322 | SAF322 | Bearing Assembly 92" & 107" | 2 | ||
| KIT-HOG107 | Part Number | 107" | 96 | 107" | $ 38231.03 |
| HP-0200 | 328C0006-00 | Hogger Blade 5 3/4" | 26 | ||
| NB-0163 | AA00163 | Screw Cap Hex | 26 | ||
| NB-0012 | AGB00012 | Locknut | 42 | ||
| HP-0322 | SAF322 | Bearing Assembly 92" & 107" | 2 |
This is the Olympic Hydraulic Pump for the Balemaster Balers. We have the 25hp, 30hp, 50hp and 75hp hydraulic pumps in stock and ready to ship for your Balemaster baler. The second two numbers in your Balemaster model number is the indication of its hp (for example: The 4450G-8 Balemaster Baler has a 50hp motor and subsequently would use the 50hp pump*). Models with a HP Rating of 60hp, 100hp and 150 hp have two 30hp, 50hp and 75hp pump respectively. If you have any questions feel free to call our parts and service experts at (844) 302-4881.
*yes we know hydraulic pumps do not have hp ratings but since each motor has the same equivalent pump we say it that way to keep things simple. If you would like to know the specific high and low flow rate of each dual vane pump feel free to call and ask.
The compatible Balemaster part numbers ( and ours in BOLD ) for the respective pumps would be HBA00044 for 25hp ( HA-0044 ) , HBA00045 for 30hp ( HA-0045 ), HBA00046 for 50hp ( HA-0046 ) and HBA00047 for 75hp ( HA-0047 )
This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads. Please let us know the Model# of your baler.
NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
This is the complete Olympic Oil Filter Kit for the Balemaster Balers. Filter kit fits all Balemaster balers. These kits includes the following parts with their equivalent Balemaster Part numbers and quantity. Kits are designated by the horsepower rating of your Balemaster baler. Feel free to call if you have any questions and or need help determining which oil filter kits is correct for your Balemaster baler.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Olympic Retail |
| KIT-OIL30 | Filter kit 30hp and 25hp | $ 443.99 | ||
| FE-0021 | HHA00021A | Breather Element | 1 | |
| FE-0030 | HHA00030 | Suction Strainer | 2 | |
| HA-0014 | 283B0014-00 | Access Cover Gasket Large | 1 | |
| HA-0017 | 283B0017-00 | Access Cover Gasket Small | 1 | |
| FE-0037 | HHB00037 | Filter Element 30HP | 1 | |
| KIT-OIL50 | Filter kit 50hp | $ 498.79 | ||
| FE-0021 | HHA00021A | Breather Element | 1 | |
| FE-0030 | HHA00030 | Suction Strainer | 2 | |
| HA-0014 | 283B0014-00 | Access Cover Gasket Large | 2 | |
| FE-0039 | HHB00039 | Filter Element 50HP | 1 | |
| KIT-OIL75 | Filter kit 75hp | $ 526.79 | ||
| FE-0021 | HHA00021A | Breather Element | 1 | |
| FE-0030 | HHA00030 | Suction Strainer | 2 | |
| HA-0014 | 283B0014-00 | Access Cover Gasket Large | 2 | |
| FE-0041 | HHB00041 | Filter Element 75HP | 1 |
We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at 866-235-8820
RA-0002 is the Olympic Bearing Roller for the Balemaster Baler. Its compatible Balemaster part number is CEA00002 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 6 of these per baler. If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
*** Ram Roller Blocks and Shafts sold separately.
