This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture
Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx
Medium 79.5" Track is for Baler Model 42xx
Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx
These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.
| Olympic Part # | Compatible BM # | Part Name | # Per Baler | Olympic Retail |
| KIT-1000 | Hooks and Shafts Assembly | 60 | $ 3,144.44 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| KIT-2000 | Cutter Knife Assembly | 42 | $ 1789.08 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 2 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| KIT-3000 | Full Wire Tying Rebuild Kit | 190 | $ 7879.46 | |
| WA-0080 | 241A0080-00 | Wire Straightener | 10 | |
| WA-0001 | 242B0001-00 | Output Wire Guide | 1 | |
| WA-0601 | SAI06-01 | Inserter Wire Guide | 1 | |
| WA-0020 | 242B0004-00 / CKA0004 | Twister Shaft | 10 | |
| WA-0030 | 242B0006-00 | Twister Hook | 10 | |
| WA-0019 | 242B0019-00 | Cutter Knife | 10 | |
| WA-0904 | 223A0509-04 | Cutter Wear Block | 7 | |
| WA-0036 | 242C0036-00 / SAT01-02 | Input Wire Guide | 1 | |
| NB-0006-03 | APA00006 | Pin Clevis | 10 | |
| NB-0008 | APC00008 | Cotter Pin | 10 | |
| WA-0010 | CHA00011 | Roller/Bushing | 15 | |
| WA-0040 | DEA00003 | Collar Set 1 | 10 | |
| WA-0462 | SP462-01 | Vertical Post | 2 | |
| WA-0003 | CKA00003 | Bushing twister | 20 | |
| NB-0046 | AAB00046 | Screw Cap Socket | 10 | |
| NB-0068 | AAA00068 | Screw Cap Hex | 11 | |
| NB-0005 | AGB00005 | Locknut Crimped | 16 | |
| NB-0038 | ACB00038 | screw cap flat | 10 | |
| NB-0002 | AGB00002 | Locknut, Crimped | 10 | |
| NB-0007 | AHA00007 | Flat Washer | 16 |
We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.
FE-0021 is the Olympic Breather Element for the Balemaster Baler. Its compatible Balemaster part number has been updated. This part will fit all Balemaster Balers and there are two of these per baler. Price is for one filter. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
FE-0030 is the Olympic Suction Strainer for the Balemaster Baler. Its equivalent Balemaster part number is HHA00030 . This part will fit all Balemaster Balers and there is 2 of these per baler. Price is for 1 Filter. If you would like to order as a Complete Oil Filter Kit CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 949 646-9731
HA-0048-3 & HA-0048-3.5 are the Olympic Cylinder Brackets for the Balemaster Balers with 8" Main Cylinders. Its compatible Balemaster part number is 213A0048-00. This part will fit Balemaster Balers with 10" Main Cylinders. There are two of these per baler ( sold as a set ) . If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Cylinder complete kit can be purchase. Save $$$
HA-0161 is the Olympic 8" and 10" Main Cylinder Rod End (Puck) for the Balemaster Baler manufactured by Olympic Wire and Equipment. Its compatible Balemaster part number is 287A0161-00 and is manufactured by OW&E. This part is the stud that connects the end of the main cylinder to the back of the ram. This part will fit all Balemaster Balers with 8" and 10" Main Cylinders. There are one of these per baler. If you would like to order as a complete Ram Reline Assembly Click Here. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Complete cylinder, brackets and cyl. ends (puck) sold as a full kit. Call for your quote.
