Hogger Bearing assembly for Balemaster Hogger CDA00008
This is the Olympic Shaft Bearing for the Balemaster Hoggers. HP-0318 is one hogger bearing size for the 62" and 77" wide units,  and HP-0322 is the other bearing size for the 92" and 107" units. Please select the proper size of your hogger or call if you are unsure. This is only the bearing and does NOT include the Housing.  Its equivalent Balemaster part number is CDA00008. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Carriage Track for Balemaster Inserter Assembly

This is the Olympic Carriage Track for the Balemaster Baler Inserter Assembly. Its compatible Balemaster part numbers are 241A0055-01, 241A0055-03 and 241A0055-05. Price is for 1 Carriage Track, each baler has 2. There are 3 different sizes depending on which baler you have. You can either measure your old part or check your baler model number and choose accordingly.If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Part is 5, 6 and 7 respectively in picture

Short 73.5" Track is for Baler Model 40xx, 44xx, 54xx

Medium 79.5" Track is for Baler Model 42xx

Long 91.5" Track is for Baler Model 48xx, 49xx, 52xx

Balemaster parts Complete Wire Tying Rebuild Kits

These are the Olympic Tying Assembly Kits for the Balemaster Balers. These kits include the following parts with their equivalent Balemaster Part numbers and quantity. These kits will fit all Balemaster Balers.

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-1000   Hooks and Shafts Assembly 60  $      3,144.44
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10  
WA-0003 CKA00003 Bushing twister 20
WA-0040 DEA00003 Collar Set 1 10  
NB-0046 AAB00046 Screw Cap Socket 10  
KIT-2000   Cutter Knife Assembly 42  $       1789.08
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 2
NB-0038 ACB00038 screw cap flat 10
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
KIT-3000   Full Wire Tying Rebuild Kit 190  $       7879.46
WA-0080 241A0080-00 Wire Straightener 10
WA-0001 242B0001-00 Output Wire Guide 1
WA-0601 SAI06-01 Inserter Wire Guide 1
WA-0020 242B0004-00 / CKA0004 Twister Shaft 10
WA-0030 242B0006-00 Twister Hook 10
WA-0019 242B0019-00 Cutter Knife 10
WA-0904 223A0509-04 Cutter Wear Block 7
WA-0036 242C0036-00 / SAT01-02 Input Wire Guide 1
NB-0006-03 APA00006 Pin Clevis 10
NB-0008 APC00008 Cotter Pin 10
WA-0010 CHA00011 Roller/Bushing 15
WA-0040 DEA00003 Collar Set 1 10
WA-0462 SP462-01 Vertical Post 2
WA-0003 CKA00003 Bushing twister 20
NB-0046 AAB00046 Screw Cap Socket 10
NB-0068 AAA00068 Screw Cap Hex 11
NB-0005 AGB00005 Locknut Crimped 16
NB-0038 ACB00038 screw cap flat 10
NB-0002 AGB00002 Locknut, Crimped 10
NB-0007 AHA00007 Flat Washer 16


We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881.

Balemaster Breather HHA00021A

FE-0021 is the Olympic Breather Element for the Balemaster Baler. Its compatible Balemaster part number has been updated. This part will fit all Balemaster Balers and there are two of these per baler. Price is for one filter. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Balemaster Suction Strainer HHA00030

FE-0030 is the Olympic Suction Strainer for the Balemaster Baler. Its equivalent Balemaster part number is HHA00030 . This part will fit all Balemaster Balers and there is 2 of these per baler. Price is for 1 Filter.  If you would like to order as a Complete Oil Filter Kit CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 949 646-9731

FE-0037 (Oil Filter)
FE-0037 is the Olympic Hydraulic Oil Filter for the Balemaster Baler with the Balemaster compatible part number of HHB00037. This filter is for the Balemaster balers with 30hp Motors, there is one of these filters per baler. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881
FE-0039 ( Oil Filter )
FE-0039 is the Olympic Hydraulic Oil Filter for the Balemaster Baler with the Balemaster compatible part number of HHB00039. This filter is for the Balemaster balers with 50hp Motors or more, there is one of these filters per baler. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at (844) 302-4881
FE-0040 (Air Breather)
FE-0040 is the Olympic air breather for the hydraulic tank on a Balemaster baler. Its compatible balemaster part number is HHB00040 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
FE-0041 (Filter Element 75hp)
This is the Olympic Hydraulic filter for the Balemaster balers with 75hp motor. Its compatible balemaster part number is HHB00041 and there is 1 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
needle valve for balemaster baler HCH00004
HA-0004 is the Olympic Needle Valve for the hydraulic assembly on a Balemaster baler. Its compatible balemaster part number is HCH00004 and there is 1 of these per baler. The image pictures is of a used unit for reference, this part is sold as a new unit. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. 
access cover gasket for balemaster baler 283B0014-00
HA-0014 is the Olympic Access cover gasket for the hydraulic tank on a Balemaster baler. This gasket is for Balers with 50-75hp motors and Its compatible balemaster part number is 283B0014-00 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
access cover gasket for balemaster baler 283B0017-00
HA-0017 is the Olympic Access cover gasket (Square) for the hydraulic tank on a Balemaster baler. This gasket is for Balers with 30-50hp motors and Its compatible balemaster part number is 283B0017-00 and there are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
4 way valve for balemaster baler HCC00038
HA-0038 is the Olympic 4-way valve solenoid for the 25 and 30hp Balemaster baler. Its compabtible balemaster part number is HCC00038 and there is 1 of these per baler. This is just for the top solenoid and does not come with the valve body. If you would like the valvebody as well that is Olympic Part number HA-0038. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
HA-0038-VB is the Olympic 4-way valve solenoid and valve body for the 25 and 30hp Balemaster baler. Its compatible balemaster part number is HCC00038 and there is 1 of these per baler. This is just for the top solenoid and does not come with the valve body. If you only need the 4-way solenoid then that is Olympic Part number HA-0038-VB. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Cylinder Bracket for 8' Main Cylinder 213A0048-00

HA-0048-3 & HA-0048-3.5 are the Olympic Cylinder Brackets for the Balemaster Balers with 8" Main Cylinders. Its compatible Balemaster part number is 213A0048-00. This part will fit Balemaster Balers with 10" Main Cylinders. There are two of these per baler ( sold as a set ) .  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

Cylinder complete kit can be purchase.  Save $$$

HA-0102 is the Olympic 8" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler. Its equivalent Balemaster part number is HAC00202 and HAC00102. This part will fit Balemaster Balers with 8" Main Cylinders. There are one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Balemaster part
HA-0217 is the Olympic Relief Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000217. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
hydraulic sun Valve for balemaster baler
HA-0218 is the Olympic Check valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000218. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-0220 is the Olympic Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000220. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
HA-0221 is the Olympic regen check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000221. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-0225 is the Olympic HV Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000225. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-0228 is the Olympic Unloading Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000228. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-0229 is the Olympic Free Flow Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000229. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-0232 is the Olympic PC Check Valve for the hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HCA000232. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
HA-0305 is an Olympic 10" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler manufactured by Olympic Wire & Equipment. Its compatible Balemaster part number is HAC00105 and HAC00205. This part will fit Balemaster Balers with 10" Main Cylinders. There is one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE . If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
HA-0506 (Side Cylinder Seal Kit)
HA-0506 is the Olympic Seal Kit for the Side Cylinder for the Balemaster Baler. Its equivalent Balemaster part number is HAS00506. This part will fit all Balemaster Balers.   If you would like to order a Rebuilt Side Cylinder we offer those as well.  If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820
HA-0603 is an Olympic 6" Main Cylinder Seal Kit (Piston & Rod) for the Balemaster Baler manufactured by Olympic. Its compatible Balemaster part number is HAM00603. This part will fit Balemaster Balers with 6" Main Cylinders. There are one of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE . If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
HA-75HP (75 HP Motor)
HA-75HP is the Olympic 75HP Electrical Motor for the hydraulic assembly on a Balemaster baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-A025 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00006. This Heat exchanger is typically used on 50hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Balemaster part
HA-A035 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. This Heat exchanger is typically used on 75hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
Hogger Bearing for Balemaster Hogger CDA00017
This is the Olympic shaft Bearing for the Balemaster Hoggers. HP-0040 is the Olympic hogger bearing size for the 62" and 77" units, HP-0050 is other bearing size.. for the 92" and 107" units. Please select the proper size or call if you are unsure. This is only the bearing and does NOT include the Housing.  Its compatible Balemaster part number is CDA00017. This part will fit all Balemaster Hoggers and there are 2 bearings per Balemaster Hogger. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Hogger Blade for Balemaster Baler 328C0006-00 328C0001-00
This is the Olympic Hogger Blade for a Balemaster Hogger. Its compatible Balemaster part number is 328C0001-00 and 328C0006. This part will fit all Balemaster Hoggers. There are 14 to 26 of these per hogger, if you are unsure how many hogger blades your Balemaster hogger has just call us with the model number and we can assist. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. When ordering please call to confirm amount of bolts needed for your Hogger. Please allow a 4 week lead time for this part. 
Hogger rebuild kits
from $23,221.16

Hogger rebuild kits

Hogger rebuild kits

$23,221.16

This is the Olympic Hogger Rebuild kit for the Balemaster Hogger. This part will fit all Balemaster Hoggers. This kit comes with the Hogger blades, Hogger Bolts and Nuts and the Bearing Assembly If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. Each Hogger width comes with a seperate amount of hogger blades and each kit is priced accordingly.  

Olympic Part # Compatible BM # Part Name # Per Baler Model Combatable  Olympic Retail 
KIT-HOG62 Part Number 62" 52 62"  $             23221.16
HP-0100 328C0001-00 Hogger Blade 4" 14  
NB-0163 AA00163 Screw Cap Hex 14  
NB-0012 AGB00012 Locknut 22  
HP-0318 SAF318 Bearings 4" 2  
KIT-HOG77 Part Number 77" 64 77"  $             28059.93
HP-0100 328C0001-00 Hogger Blade 4" 18  
NB-0163 AA00163 Screw Cap Hex 18  
NB-0012 AGB00012 Locknut 26  
HP-0318 SAF318 Bearings 4" 2  
KIT-HOG92 Part Number 92" 84 92"  $             33392.25
HP-0200 328C0006-00 Hogger Blade 5 3/4" 22  
NB-0163 AA00163 Screw Cap Hex 22  
NB-0012 AGB00012 Locknut 38  
HP-0322 SAF322 Bearing Assembly 92" & 107" 2  
KIT-HOG107 Part Number 107" 96 107"  $             38231.03
HP-0200 328C0006-00 Hogger Blade 5 3/4" 26  
NB-0163 AA00163 Screw Cap Hex 26  
NB-0012 AGB00012 Locknut 42  
HP-0322 SAF322 Bearing Assembly 92" & 107" 2  

 

Hydraulic Pump for Balemaster Baler

This is the Olympic Hydraulic Pump for the Balemaster Balers. We have the 25hp, 30hp, 50hp and 75hp hydraulic pumps in stock and ready to ship for your Balemaster baler. The second two numbers in your Balemaster model number is the indication of its hp (for example: The 4450G-8 Balemaster Baler has a 50hp motor and subsequently would use the 50hp pump*). Models with a HP Rating of 60hp, 100hp and 150 hp have two 30hp, 50hp and 75hp pump respectively. If you have any questions feel free to call our parts and service experts at (844) 302-4881

*yes we know hydraulic pumps do not have hp ratings but since each motor has the same equivalent pump we say it that way to keep things simple. If you would like to know the specific high and low flow rate of each dual vane pump feel free to call and ask. 

The compatible Balemaster part numbers ( and ours in BOLD ) for the respective pumps would be HBA00044 for 25hp ( HA-0044 ) , HBA00045 for 30hp ( HA-0045 ), HBA00046 for 50hp ( HA-0046 ) and HBA00047 for 75hp ( HA-0047

Inserter Bars (Needles) for Balemaster Balers

This is the Olympic Inserter Bar Assembly (Also called Forks, Swords or Needles) for the Balemaster Balers. Its compatible Balemaster part number is SAN001-02 and parts are Made in America by Olympic Wire and Equipment. The Inserter Heads fit all Balemaster balers. If you would like to order the specific full Inserter Bar for your baler please select your respective baler model number. These assemblies come with the rollers in the heads.  Please let us know the Model# of your baler. 

 

NB-0012 is the Olympic Locknut for Hogger Blades on a Balemaster Hogger. Its compatible Balemaster part number is AGB00012. This part will all Balemaster Hoggers. There is up to 26 of these per hogger depending on the model. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. when ordering please call to confirm amount of bolts needed for your Hogger
NB-0028 (Inserter Head Bearing Bolt)
NB-0028 is the Olympic bolt for the bearings at the end of the Inserter for a Balemaster Baler. Its compatible Balemaster part number is ACB00028. This part will fit all Balemaster Balers. There are up to 10 of these per Baler, depending on the model. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
NB-0033 is the Olympic Door Latch for the twister cabinets on the Balemaster Balers. Its compatible Balemaster part number is ZTA00033. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Puck Bolts (8" Cyl) Balemaster 114A0001-04
NB-0104 is the Olympic Puck Bolts for the 8" Main Cylinder on the Balemaster Baler. Its compatible Balemaster part number is 114A0001-04. This part will fit Balemaster Balers with 8" Main Cylinders. There is 6 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
NB-0110 (Wing Nuts)

NB-0110 is the Olympic Wing nut for the Balemaster Baler baling wire. This part will fit all Balemaster Balers AZA00011 and there is 30 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

NB-0163 is the Olympic Bolt for Hogger Blades on a Balemaster Hogger. Its compatible Balemaster part number is AAA00163. This part will fit all Balemaster Hoggers. There are up to 26 of these per hogger, depending on the model. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. When ordering please call to confirm amount of bolts needed for your Hogger
Puck Bolts (10" Cyl) Balemaster 114A0009-01
NB-0901 is the Olympic Puck Bolts for the 10" Main Cylinder on the Balemaster Baler. Its compatible Balemaster part number is 114A0009-01. This part will fit Balemaster Balers with 10" Main Cylinders. There is 6 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
Oil Filter Kits for Balemaster Balers

This is the complete Olympic Oil Filter Kit for the Balemaster Balers. Filter kit fits all Balemaster balers. These kits includes the following parts with their equivalent Balemaster Part numbers and quantity. Kits are designated by the horsepower rating of your Balemaster baler. Feel free to call if you have any questions and or need help determining which oil filter kits is correct for your Balemaster baler. 

Olympic Part # Compatible BM # Part Name # Per Baler  Olympic Retail 
KIT-OIL30   Filter kit 30hp and 25hp    $                  443.99
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 1
HA-0017 283B0017-00 Access Cover Gasket Small 1
FE-0037 HHB00037 Filter Element 30HP 1
KIT-OIL50   Filter kit 50hp    $                  498.79
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 2
FE-0039 HHB00039 Filter Element 50HP 1
KIT-OIL75   Filter kit 75hp    $                  526.79
FE-0021 HHA00021A Breather Element 1
FE-0030 HHA00030 Suction Strainer 2
HA-0014 283B0014-00 Access Cover Gasket Large 2
FE-0041 HHB00041 Filter Element 75HP 1

 

We have factory trained service techs available for installation. If you have any questions or would like to schedule a service please do not hesitate to call and speak to one of our parts and service experts at 866-235-8820

balemaster bearing for ram CEA00002

RA-0002 is the Olympic Bearing Roller for the Balemaster Baler. Its compatible Balemaster part number is CEA00002 and is an American Made part. This part will fit Balemaster Balers with models 40XX, 42XX and 44XX. There is 6 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881

*** Ram Roller Blocks and Shafts sold separately.

RA-0012 is the Olympic Gib Bar for the Balemaster Baler. Its compatible Balemaster part number is 222B0012-12. There are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881. The part is item #4 in the image. 
RA-0032 is the Olympic Gib Bar for the Balemaster Baler. Its compatible Balemaster part number is 222A0032-00. There are 2 of these per baler. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881
RA-0522 (Top Liner Bronze)
RA-0522 is the Olympic Top Liner Bronze for the Balemaster Baler. Its equivalent Balemaster part number is 223A0522-02. There are 2 of these per baler.  If you would like to order as a complete Ram Reline Assembly CLICK HERE. If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at 866-235-8820. Price is for 1 Bronze Liner