巴莱马斯特·霍格轴承总成总成完成

Balemaster 插入器组件的运输轨迹
这是巴勒马斯特巴勒插入器大会的奥林匹克运输轨道。 其兼容的 Balemaster 零件号是 241A0055-01、241A0055-03 和 241A0055-05。价格为 1 滑轨,每个包架有 2。有3种不同的尺寸,这取决于你有哪个包膏。您可以测量您的旧零件或检查您的包膏型号并做出相应选择。如果您对该零件有任何疑问,请随时致电(844) 302-4881与我们的零件专家联系。图片中的零件分别是5、6和7。
短 73.5 "轨道适用于 Baler 型号 40xx, 44xx, 54xx
Medium 79.5" Track is for Baler Model 42xx
长 91.5 "轨道适用于 Baler 型号48xx、49xx、52xx


Balemaster打包机的全套绑线器改造套件
这些是奥运捆绑装配套件 Balemaster平衡器。这些套件包括以下部件及其对应的 Balemaster 部件号和数量。这些配件包将适用于所有Balemaster平衡器。
奥林匹克部分 # | 兼容BM # | 零件名称 | # 每平衡器 | 奥林匹克零售 |
KIT-1000 | 挂钩和轴总成 | 60 | $ 3,144.44 | |
WA-0020 | 242B000-00/CKA0004 | 扭转轴 | 10 | |
WA-0030 | 242B0006-00 | 旋翼钩 | 10 | |
WA-0003 | CKA00003 | 衬套绕组 | 20 | |
WA-0040 | DEA00003 | 领子套装1 | 10 | |
NB-0046 | AAB00046 | 螺帽插座 | 10 | |
KIT-2000 | 切割刀总成 | 42 | $ 1789.08 | |
WA-0019 | 22B0019-00 | 切割刀 | 10 | |
WA-0904 | 223A0509-04 | 切割机磨损块 | 2 | |
NB-0038 | ACB00038 | 螺帽扁平 | 10 | |
NB-0006-03 | APA00006 | 平克莱维斯 | 10 | |
NB-0008 | APC00008 | 棉针脚 | 10 | |
KIT-3000 | 全线连接重建套件 | 190 | $ 7879.46 | |
WA-0080 | 241A000-00 | 钢丝绳 | 10 | |
WA-0001 | 242B0001-00 | 输出线指南 | 1 | |
WA-0601 | SAI06-01 | 插入线指南 | 1 | |
WA-0020 | 242B000-00/CKA0004 | 扭转轴 | 10 | |
WA-0030 | 242B0006-00 | 旋翼钩 | 10 | |
WA-0019 | 22B0019-00 | 切割刀 | 10 | |
WA-0904 | 223A0509-04 | 切割机磨损块 | 7 | |
WA-0036 | 242C0036-00/SAT01-02 | 输入线指南 | 1 | |
NB-0006-03 | APA00006 | 平克莱维斯 | 10 | |
NB-0008 | APC00008 | 棉针脚 | 10 | |
WA-0010 | CHA00011 | 滚子/衬套 | 15 | |
WA-0040 | DEA00003 | 领子套装1 | 10 | |
WA-0462 | SP462-01 | 垂直职位 | 2 | |
WA-0003 | CKA00003 | 衬套绕组 | 20 | |
NB-0046 | AAB00046 | 螺帽插座 | 10 | |
NB-0068 | AAA00068 | 螺丝钉盖六角 | 11 | |
NB-0005 | AGB00005 | 锁紧螺母卷曲 | 16 | |
NB-0038 | ACB00038 | 螺帽扁平 | 10 | |
NB-0002 | AGB00002 | 锁紧螺母, 卷曲 | 10 | |
NB-0007 | AHA00007 | 平板式清洗机 | 16 |
我们有工厂培训的服务技术可供安装。如果您有任何问题或想安排服务, 请不要犹豫, 打电话给我们的部分和服务专家之一 (844) 302-4881.
EA-0031 (Limit Switch)


FE-0021 (Breather Element)
FE-0021 is the Olympic Breather Element 为 Balemaster打包机。其兼容的Balemaster零件编号已经更新。 这个部件适用于所有Balemaster打包机,每个打包机有两个。价格为一个过滤器。 如果您对该零件有任何疑问,请随时致电(844) 302-4881与我们的零件专家联系。
FE-0030 (Suction Strainer)
FE-0030 is the Olympic Suction Strainer 为 Balemaster Baler. Its equivalent Balemaster part number is HHA00030 .这个部分将适合所有的 Balemaster Baler, 并且有2个这样每个 baler。价格为1个过滤器。 如果你想订购作为一个完整的机油滤清器套件 点击这里.如果您对该零件有任何疑问,请立即致电949 646-9731,与我们的零件专家交谈。

FE-0037 (Oil Filter)

FE-0039 ( Oil Filter )

FE-0040 (Air Breather)

FE-0041 (Filter Element 75hp)

HA-0004 (Needle Valve)




HA-0038 (4-Way Valve 30hp)





HA-0048-3 & HA-0048-3.5 are the Olympic Cylinder Brackets 为 Balemaster Balers with 8" Main Cylinders. Its compatible Balemaster part number is 213A0048-00. This part will fit Balemaster Balers with 10" Main Cylinders. There are two of these per baler ( sold as a set ) . If you would like to order as a complete Ram Reline Assembly 点击这里.如果您对该零件有任何疑问,请随时致电(844) 302-4881与我们的零件专家联系。
可以购买油缸成套设备。 节省$$$


HA-0161 is the Olympic 8" and 10" Main Cylinder Rod End (Puck) 为 Balemaster Baler manufactured by Olympic Wire and Equipment. Its compatible Balemaster part number is 287A0161-00 and is manufactured by OW&E. This part is the stud that connects the end of the main cylinder to the back of the ram. 此部分将适合所有巴勒马斯特巴勒斯与 8" 和 10" 主缸.有一个这种每包。 如果您想订购作为一个完整的拉姆重新线装配 点击这里.如果您对该零件有任何疑问,请随时致电(844) 302-4881与我们的零件专家联系。
完整的油缸、支架和油缸端部(puck)作为一个完整的套件出售。 请打电话询问报价。

HA-0217 (Relief Valve Assembly)

HA-0218 (Check Valve)



HA-0225 (HV Unloading Valve)

HA-0228 (Unloading Valve)

HA-0229 (Free Flow Check Valve)

HA-0232 (PC Check Valve)

HA-0506 (Side Cylinder Seal Kit)




HA-75HP (75 HP Motor)

HA-A020 (AO-20 Heat Exchanger)
HA-A020 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00023. This Heat exchanger is typically used on 30hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.

HA-A025 (AO-25 Heat Exchanger)
HA-A025 is the Olympic Heat Exchanger for the Hydraulic assembly on a Balemaster baler. Its compabtible balemaster part number is HDA00006. This Heat exchanger is typically used on 50hp balers If you have any questions about the part please do not hesitate to call and speak to one of our parts experts at (844) 302-4881.
